STC ST09720AC

FAA Form 8110-2 (5/14) Page 1 of 3

Number: ST09720AC This certificate issued to: United Airlines 600 Jefferson St.

Houston, TX 77002 Part 25 of the Federal Aviation Regulations Original Product – Type Certificate Number: Make: The Boeing Company A16WE Model: 737-900/900ER Series Description of Type Design Change:

737- 900/900ER Reconfiguration from 20/153 to 20/147 in accordance with United Airlines Master Drawing List 2500DA12908 Revision D, dated September 27, 2013 or later FAA approved revision.

Instructions for Continued Airworthiness, Document Number 2500R01040 Revision B, dated August 29, 2013 or later FAA accepted revision is required for this installation. No AFM Supplement or EWIS Source Document is required for this modification.

1) The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft.

2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Date of Application: August 30, 2012 Date Reissued: February 1, 2016; July 3, 2017 Date of Issuance: September 7, 2013 Date Amended: October 2, 2013 By Direction of the Administrator Signature Title Patrick Ashton, STC Administrator United Airlines Organization Designation Authorization

FAA Form 8110-2 (5/14) Page 2 of 3

Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: ST09720AC To (Name and address of transferee)

From (Name and address of grantor)

FAA Form 8110-2 (5/14) Page 3 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09720AC

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are not significant in FAA Order 8110.48, the certification basis for this modification is as follows:

a. The type certification basis for parts not changed or not affected by the change is shown in TCDS A16WE.

b. The certification basis for parts changed or affected by this modification since the reference application date August 30, 2012, is based upon the type certification basis shown in TCDS A16WEwith no exceptions.

--END--

FAA Form 8110-2 (5/14) Page 4 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09720AC

FAA Form 8110-2 (5/14) Page 5 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09720AC

FAA Form 8110-2 (5/14) Page 6 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09720AC