STC ST09737AC

FAA Form 8110-2 (5/14) Page 1 of 3

Number: ST09737AC This certificate issued to: United Airlines 600 Jefferson St.

Houston, TX 77002 Part 25 of the Federal Aviation Regulations Original Product – Type Certificate Number: Make: The Boeing Company A16WE Model: 737-700 Series Description of Type Design Change:

737-700 GBO Seat Modification in accordance with United Airlines Master Drawing List 2500DA13532 Rev B, dated November 17, 2014 or later FAA approved revision.

Instructions for Continued Airworthiness, Document Number 2500R01 155 Revision B, dated September 10, 2014, or later FAA accepted revision is required for this installation. No AFM Supplement or EWIS ICA is required for this modification.

1) The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft.

2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3) Prior installation of United Airlines, Inc. Supplemental Type Certificate ST09726AC or equivalent is required for the installation of this STC.

Date of Application: November 8, 2013 Date Reissued: February 1, 2016; October 24, 2017 Date of Issuance: December 20, 2013 Date Amended: November 8, 2014 By Direction of the Administrator Signature Title Patrick Ashton, STC Administrator United Airlines Organization Designation Authorization

FAA Form 8110-2 (5/14) Page 2 of 3

Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: ST09737AC To (Name and address of transferee)

From (Name and address of grantor)

FAA Form 8110-2 (5/14) Page 3 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09737AC

Certification Basis:

Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are not significant in FAA Order 8110.48, the certification basis for this modification is as follows:

a. The type certification basis for parts not changed or not affected by the change is shown in TCDS A16WE.

b. The certification basis for parts changed or affected by this modification since the reference application date November 8, 2013, is based upon the type certification basis shown in TCDS A16WE with no exceptions.

c. The modification certification basis also includes Special Conditions Number 25-358-SC, dated August 9, 2007.

--END--

FAA Form 8110-2 (5/14) Page 4 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09737AC

FAA Form 8110-2 (5/14) Page 5 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09737AC

FAA Form 8110-2 (5/14) Page 6 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09737AC