What it approves
A319 Aft Cargo Rack and Shroud Installation
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 3
Number: ST09809AC This certificate issued to: United Airlines 600 Jefferson St.
Houston, TX 77002 Part 25 of the Federal Aviation Regulations Original Product – Type Certificate Number: Make: The Boeing Company A28NM Model: A319-100 Series Description of Type Design Change:
A319 Aft Cargo Rack and Shroud Installation in accordance with United Airlines Master Drawing List 4435DA14356, Revision ‘C’, dated March 21, 2016 or later FAA approved revision.
Instructions for Continued Airworthiness, Document Number 4435R01349C, dated March 3, 2016 or later FAA approved revisions must be made available to the operator at the time of installation. There is no EWIS Source Document or AFM Supplement associated with this modification.
1) The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft.
2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Date of Application: December 10, 2015 Date Reissued: October 26, 2017 Date of Issuance: March 31, 2016 Date Amended:
By Direction of the Administrator Signature Title Patrick Ashton, STC Administrator United Airlines Organization Designation Authorization
FAA Form 8110-2 (5/14) Page 2 of 3
Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: ST09809AC To (Name and address of transferee)
From (Name and address of grantor)
FAA Form 8110-2 (5/14) Page 3 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09809AC
Certification Basis:
Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are not significant in FAA Order 8110.48, the certification basis for this modification is as follows:
a. The type certification basis for parts not changed or not affected by the change is shown in TCDS A28NM.
b. The certification basis for parts changed or affected by this modification since the reference application date December 10, 2015, is based upon the type certification basis shown in TCDS A28NM with the following exceptions.
14 CFR Part Amdt 14 CFR Part Amdt
25.571 (a) 25-86 25.857(c) 25-60
25.855(a)(b)(c)(d) 25-60 --END--
FAA Form 8110-2 (5/14) Page 4 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09809AC
FAA Form 8110-2 (5/14) Page 5 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09809AC
FAA Form 8110-2 (5/14) Page 6 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09809AC
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 8
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| October 26, 2017 | Reissued, current | Certificate |
| March 31, 2016 | Issued, earlier issue | Certificate |