What it approves
Aft Cargo Rack and Shroud Installation
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 3
Number: ST09820DS This certificate issued to: United Airlines 600 Jefferson St.
Houston, TX 77002 Part 25 of the Federal Aviation Regulations Original Product – Type Certificate Number: Make: Airbus SAS A28NM Model: A320 Series Description of Type Design Change:
Aft Cargo Rack and Shroud Installation in accordance with United Airlines Master Drawing List 4435DA15007 Revision ‘B‘, dated April 10, 2018 or later FAA approved revision.
Supplemental Instructions for Continued Airworthiness Number 4435R01479C dated April 10, 2018, or later FAA approved revisions must be made available to the operator at the time of installation. No AFM Supplement or EWIS ICA is required for this installation.
1) The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft.
2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Date of Application: January 22, 2018 Date Reissued:
Date of Issuance: April 13, 2018 Date Amended:
By Direction of the Administrator Signature Title Patrick Ashton, STC Administrator United Airlines Organization Designation Authorization
FAA Form 8110-2 (5/14) Page 2 of 3
Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: ST09820DS To (Name and address of transferee)
From (Name and address of grantor)
FAA Form 8110-2 (5/14) Page 3 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09820DS
Certification Basis:
Based on 14 CFR § 21.115 and § 21.101, and the FAA policy for design changes that are not significant in FAA Order 8110.48, the certification basis for this modification is as follows:
a. The type certification basis for parts not changed or not affected by the change is shown in TCDS A28NM.
b. The certification basis for parts changed or affected by this modification since the reference application date January 22, 2018, is based upon the type certification basis shown in TCDS A28NM with the following exceptions.
14 CFR Part Amdt 14 CFR Part Amdt
25.855 (a)(b)(c)(d) 60 25.857 (c) 60 --END--
FAA Form 8110-2 (5/14) Page 4 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09820DS
FAA Form 8110-2 (5/14) Page 5 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09820DS
FAA Form 8110-2 (5/14) Page 6 of 3
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09820DS
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.