What it approves
Installation of Otonomy cameras (structural provisions only)
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Number: ST09852AC
This certificate issued to: Delta G Design, Inc.
716 Lake Air Dr., Suite G Waco, TX 76710
Part 25 of the Federal Aviation Regulations
Original Product – Type Certificate Number: Make: The Boeing Company Model: 737-400 Series, 737-500 Series, 737-600 Series A16WE 737-700 Series, 737-800 Series, 737-900 Series 737-900ER Series
Installation of Otonomy cameras (structural provisions only) in accordance with Delta G Design Master Data List DGD-SOCM01-MD-01, Rev. IR, dated December 17, 2015, or later FAA approved revision. Maintained per Delta G Design Instructions for Continued Airworthiness DGD-SOCM01-IC-01, Rev. IR, dated December 15, 20, 2015, or later FAA accepted revision.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission. This certificate is for structural provisions only. EMI and functional testing is required as part of a separate approval when associated component parts are installed.
Date of Application: March 16, 2015 Date Reissued:
Date of Issuance: December 29, 2015 Date Amended:
Signature
Title Scott A. Horn Manager, Airplane Certification Office Southwest Region
FAA Form 8110-2 (5/14) Page 3 of
To (Name and address of transferee)
From (Name and address of grantor)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.