What it approves
Increase takeoff weight and install a takeoff trim out-of-range warning system and an “ice mode” stall warning system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (03/21) SUPERSEDES PREVIOUS EDITION Page 1 of __ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: ST09934AC This certificate issued to:
Part Make:
CenTex Aerospace, Inc.
7925 Karl May Drive Waco, TX 76708 A24CE Textron Aviation Inc.
B300, B300C S. Frances Cox Acting Manager, Fort Worth ACO Branch Compliance & Airworthiness Division Aircraft Certification Service
3 23 of the Federal Aviation Regulations.
Increase takeoff weight and install a takeoff trim out-of-range warning system and an “ice mode” stall warning system in accordance with CenTex Aerospace, Inc. Master Drawing List 051-0000, Revision A, dated August 10, 2022, or later FAA approved revision. Airplane Flight Manual Supplement AFM 051-1, Revision IR, dated April 2023, or later FAA approved revision is required.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(Continued on page 3 of 3)
June 29, 2017 April 4, 2023
FAA Form 8110-2 (03/21) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:
ST09934AC 3
FAA Form 8110-2 (3/21) Page _ 3 of United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST09934AC Limitations and Conditions (continued) Instructions for Continued Airworthiness (ICA), CenTex Aerospace, Inc. Document 051-30, Rev. IR, dated January 2023, or later FAA accepted revision must be made available to the operator at the time of installation.
Certification Basis:
Based on 14 CFR § 21.115 and 21.101, and FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Textron Aviation Inc. (Beechcraft) B300, B300C is as follows:
a. The certification basis for B300, B300C airplanes is shown on Type Certificate Data Sheet (TCDS) A24CE for parts not changed or not affected by the change.
b. The certification basis for parts changed or affected by the change since the reference date of application, June 29, 2017, is based upon part 23 as amended by Amendment 23-62 and 14 CFR Part 36.
1. Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this modification was determined to be:
Regulations at the latest amendment 23-0 through 23-62
23.1, 23.21, 23.23, 23.25(a), 23.45, 23.49(a)(b), 23.51(c), 23.53(c), 23.55, 23.57, 23.59, 23.61, 23.63(a)( d),
23.67(d), 23.69, 23.73(c), 23.75, 23.77(c), 23.141, 23.143, 23.145, 23.147, 23.149(a)(b)(d)(e), 23.155, 23.157,
23.171, 23.173, 23.175, 23.177, 23.181, 23.201, 23.203, 23.207(a)(b)(c)(d)(e), 23.231(a), 23.233(a)(c), 23.251,
23.253(a)(b)(c), 23.301(a)(b)(c), 23.303, 23.305, 23.307, 23.321, 23.331, 23.333, 23.335, 23.337, 23.341, 23.345,
23.347(a), 23.349(a)(2)(b), 23.351, 23.365(a), 23.367, 23.391, 23.395, 23.421, 23.423, 23.425, 23.427, 23.441,
23.443, 23.445, 23.471, 23.473(a)(b)(d)(e)(f)(g), 23.485, 23.493, 23.499(a)(b)(c)(e), 23.507, 23.509, 23.511,
23.575, 23.601, 23.603, 23.605, 23.609, 23.625, 23.627, 23.651, 23.657, 23.659, 23.675, 23.677(d), 23.681,
23.683, 23.693, 23.703, 23.731, 23.733(a), 23.735(e), 23.773(a)(2), 23.901(b)(1)(e), 23.907, 23.925(a), 23.961,
23.1041, 23.1043, 23.1045, 23.1301, 23.1303(e), 23.1306, 23.1307, 23.1308, 23.1309, 23.1310, 23.1322(d)(e),
23.1323(b)(e), 23.1325(e), 23.1351(a)(b), 23.1357, 23.1359, 23.1365, 23.1367, 23.1431(a)(b)(e), 23.1501,
23.1505(c), 23.1511, 23.1513, 23.1519, 23.1521, 23.1529, 23.1541(a)(b), 23.1545(d), 23.1581(a)(b)(c)(d)(f),
23.1583, 23.1585(a)(c)(f)(j), 23.1587(a)(d), and 23.1589.
Regulations at an intermediate amendment N/A Regulations at the amendment level in TCDS A24CE
23.161, 23.571, 23.572(b), 23.611, 23.629, 23.1353(h), 23.1419, 23.1507, 23.1545(a)(b)(4)(5)(6), and 23.1563.
14 CFR Part 36 regulations
36.1(c) amendment 36-30; 36.2(b) amendment 36-24; 36.9(a) amendment 36-19; 36.501(c) amendment 36-19;
36.1501(a) amendment 36-15; 36.1581(a)(2)(c) amendment 36-25.
------------------------------------------------ END ----------------------------------------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.