What it approves
Installation of executive interior. Approval limited to serial number 30782 ONLY. Cert basis is same except with addition of Special Condition Issue Paper that covers installation of cookpot stove in galley of this aircraft.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Project Number SA8865SC-T TXN
Part 25 of the Federal Aviation Regulations.
Description of Type Design Change: Installation of an Executive Interior in accordance with Associated Air Center Master Document List, Document Number R137-000, Revision F, dated August 08, 2008, or later FAA approved revision. Airplane Flight manual Supplement, Document Number R137-011, Rev. A, dated August 14, 2008, or later FAA approved revision is required.
Limitations and Conditions: You cannot use descriptive data about this design change to duplicate other products.
This approval is limited to only the installation made in Boeing 737-7BC, Serial Number 30782. This STC does not permit manufacturing parts for multiple installations. This modification must be maintained in accordance with the Instructions for Continued Airworthiness, Associated Air Center document number R137-009, Revision G, dated July 21, 2008, or later FAA approved revision. The airworthiness limitations inspections to comply with FAR 25, Appendix H, are contained in the Instructions for Continued Airworthiness, document number R137-009, Rev. G, dated July 21, 2008, Chapter 2.
Certification Basis: The certification basis for this STC is the same as identified on the Type Certificate Data Sheet, plus compliance with 25.981, amendment number 102, Special Condition Issue Paper “Certification of Cooktops” dated July 13, 2001, and with 14 CFR Part 26 amendment number 1.
Associated Air Center 8321 Lemmon Avenue Dallas, TX 75209 A16WE Make : Boeing Model: 737-700 Series
Date amended: August 14, 2008, Revision 1
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
Date of application: January 11, 2001
Date of issuance: July 18, 2001
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 737-700 Series | A16WE |