STC ST09944SC

FAA Form 8110-2 (8/13) Page 1

Part of the Federal A viation Regulations.

Original Product – Type Certificate Number: MDNH:

MRGHO:

Signature

Title

ST09944SC Associated Air Center, Inc. - c/o CT Corporation System 1999 Bryan Street, Suite 900 Dallas, TX 75201 25 A16WE Boeing 737-200 Series

Installation of an Executive Interior in accordance with Associated Air Center documents "Master Document List", Document Number R135-000, Revision G, dated December 11, 2017, or later FAA approved revision, and "Airplane Flight Manual Supplement", Document Number R135-037, Revision IR, dated July 21, 2001, or later FAA approved revision.

See continuation on sheet 3 or 3.

Descriptive data pertaining to this design change are considered inadequate for duplication in other products. This approval is limited to only the installation made in Boeing Model 737-2H6, Serial Number 22620. This STC does not permit the manufacturing of parts for multiple installations. This aircraft is not to be operated for hire or offered for common carriage.

9/14/2000 7/25/2001 12/13/2017 Jose Mora-Vargas ODA Administrator ODA-710437-SW

FAA Form 8110-2 (8/13) Page 2

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

ST09944SC

FAA Form 8110-2 (8/13) Page 3

ST09944SC

Type Design Change (Continued)

"Instructions for Continued Airworthiness", Document Number R135-009, Revision A, dated June 27, 2001, or later FAA approved revision.

Certification Basis: The same as that identified on Type Certificate Data Sheet A16WE with the addition of Exemption Number 7561 approves the exemption from 25.813(e), of Title 14, Code of Federal Regulation and allows the installation of doors between passenger compartments in this aircraft.

END