STC ST10216SC

FAA Form 8110-2 (7/19) Page 1 of 2

Number: ST10216SC

Parts 25 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: A1NM Make: Boeing Model: 767-200 Series; 767-300 Series; 767-300F Series;

767-400ER Series

Provisions to install a X-band Fuselage Enhanced Vision System (EVS) Nose Radome Assembly in accordance with Nordam Master Drawing list MDL-190-767-01, Revision IR, dated October 3, 2003, or later FAA approved revision. Maintained in accordance with Document Number NTX-CMM-B767-EVS, Revision IR, dated October 20, 2003, or later FAA approved revision is required.

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission. The equipment for which these provisions are intended has not been certified. Additional FAA approval is required for the installation of this equipment and must be evaluated to assure satisfactory compliance with the applicable airworthiness standards.

Date of Application: July 16, 2003 Date Reissued: February 26, 2004; April 01, 2019 Date of Issuance: January 13, 2004 Date Amended:

Signature

Title Jim Grigg Manager, Fort Worth ACO Branch, Compliance & Airworthiness Division Aircraft Certification Service The NORDAM Group LLC 6910 N. Whirlpool Tulsa, OK 74117

FAA Form 8110-2 (7/19) Page 2 of 2

FAA Form 8110-2 (7/19) Page 2 of 2

Transfer the ownership of Supplemental Type Certificate Number: ST10216SC

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA8830SW

FAA Form 8110-2 (7/19) Page 2 of 2