STC ST10469SC

3209 Louis Drive Plano, TX 75023

Part 25 of the Federal Aviation Regulations.

Original Product Type Certificate Number : A20WE Make : Boeing Model : 747-400

Description of Type Design Change: Installation of interior components in accordance with Aero Compliance Group, Inc. Drawing List ACG-DL0100, Revision D, dated October 9, 2005, or later FAA approved revision.

Limitations and Conditions: Approval of this change in type design applies to the aircraft model listed above. See continuation sheet for list of the limitations and differences in certification basis. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design will introduce no adverse effect upon the airworthiness of that aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application : February 21, 2005

Date of issuance October 26, 2005 Date reissued :

( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region

(Title)

United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Project Number ST8077SC-T, ASW-190 RMR

FAA Form 8110-2-1(10-69) Page 2 of 2

Number ST10469SC Date of Issuance: October 26, 2005

Limitations and Conditions (Continued): The certification basis for this modification is in accordance with Type Certificate Data Sheet, A20WE, with the following exceptions:

Regulations at a later amendment than specified in A20WE.

25.783(j) Amdt. 25-88

25.853(a), (d), (e) Amdt. 25-83

25.869 (a)(4) Amdt. 25-113

25.981 (a), (b) Amdt. 25-102

25.1351 (a) Amdt. 25-72

25.1353 (a) (b) Amdt. 25-113

25.1431 (a), (c), (d) Amdt. 25-113

25.1529 Amdt. 25-54