What it approves
Installation of a Rudder Assist Arm
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
certifies that the change in the type design for the following product with the limitations and conditions therefor as specified hereon meets the airwo rthiness requirements of Part 23 of the Federal Aviation R egulations.
Original Product Type Certificate N umber :
Description of Type Design Change: Installation of a Rudder Assist Arm in accordance with Master Data List Document Number CDP-MD-001Revision 3R dated 7-20-06, or later FAA approved revision. FAA approved Aircraft Flight Manual Supplement dated July 12, 2006 or later FAA approved revision is required.
Limitations and Conditions: You cannot use descriptive data about this design change to duplicate other products.
This approval is limited to only the installation made in Cessna 501 Serial No. 501-0234. This STC does not permit manufacturing of parts for multiple installations.
Paul Lewicki 2300 East 14th Street Tulsa, OK 74104 A27CE M ake : Cessna M odel : 501 Date of applicatio n : April 17, 2006
Date of issuance : July 28, 2006
B y direction of the A dministrator
(Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cessna Aircraft Company | 501 | A27CE |