What it approves
Installation of an Executive Interior
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 25 of the PART R egulations.
Original Product Type Certificate N umber :
Description of Type Design Change: Installation of an Executive Interior in accordance with the Gore Design Completions, Ltd., Certification Drawing List, GCD-388-03, revision H, dated: November 15, 2006, or later FAA approved revision. Maintained per the “Instructions for Continued Airworthiness Boeing 767-238 S/N 23896” GCD- 388-ICA, revision C, dated October 17, 2006, or later FAA accepted revision and operated in accordance with " Airplane Flight Manual Supplement for Boeing 767-238 with Interior", Document Number GFA-338-24, revision A, dated:
November 21, 2006, or later FAA approved revision, is required.
Limitations and Conditions: You cannot use descriptive data about this design change to duplicate other products.
This approval is limited to only the installation made in Boeing Model 767-238 Serial No. 23896. This STC does not permit manufacturing of parts for multiple installations.
Certification Basis: As identified on Type Certificate Data sheet A1NM, compliance with 14 CFR FAR Part 25.981, amendment number 102, and with the elected addition of Exemptions No. 8682 and No. 8683.
Gore Design Completions, Ltd 607 North Frank Luke Drive San Antonio, TX 78226 A1NM M ake : Boeing M odel : 767-238 Date of application : June 17, 2005
Date of issuance : November 21, 2006
B y direction of the A dministrator
(Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
(Title)
Project Number ST8184SC-T (JRR)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 767-200 Series | A1NM |