STC ST10708DS

Number ST10708DS

This certificate issued to: L-3 Communications Integrated Systems, L.P.

10001 Jack Finney Blvd.

Greenville, TX 75402

Part 25 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: A2NM Make: The Boeing Company Model: 757-200

Installation of a Main Landing Gear Camera in accordance with (1) L-3 Communications Integrated Systems, L.P. Sealed Drawing List SDL 10615-2 Revision NC, dated 05 April 2019, (2) Instructions for Continued Airworthiness (ICA), L-3 Communications Document No. G10616.28.08-01 Revision NC, dated 24 Jan 2019, (3) Flight Manual Supplement, L-3 Communications Document No. G10616.28.51-01 Revision NC, dated 24 Jan 2019 or later FAA/ODA approved revisions of (1) (2) and/or (3).

(Limitations and Conditions continued on page 3 of 3)

Date of application: 28 Feb 2018 Date reissued:

Date of issuance: 05 April 2019 Date amended:

Signature

Title ODA-750173-SW Administrator Page 1 2 3 Amdt

Possession of this Su pplemental Type Certificate (STC) document by persons other than the STC holder does not constitute rights to the design data nor to alter an aircraft, aircraft engine, or propeller.

FAA Form 8110-2 (5/14) Page 1 of 3

To (Name and address of transferee)

From (Name and address of grantor)

Possession of this Su pplemental Type Certificate (STC) document by persons other than the STC holder does not constitute rights to the design data nor to alter an aircraft, aircraft engine, or propeller.

FAA Form 8110-2 (5/14) Page 2 of 3

Number: ST10708DS Date of Issuance: 05 April 2019 Limitations and Conditions: (Continued)

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.

3. Installation of STC ST02372CH is a pre-requisite for this STC.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Boeing Company 757-200 aircraft is as follows:

a. The type certification basis for 757-200 series airplanes is shown on TCDS A2NM for parts not changed or not affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of application, 28 February 2018, was determined to be as follows:

Para. Amdt. Para. Para. Amdt.

25.29(a)(b) 25-42 25.581(a)(b) 25-23 25.1307(c) 25-23

25.301(a)(b) 25-23 25.601 0 25.1309(a)(b)(d)(e)(f)(g) 25-41

25.303 25-23 25.603(a)(b) 25-38 25.1322(c)(d) 25-38

25.305(a)(b) 25-23 25.609(a)(b) 0 25.1333(b)(c) 25-41

25.307(a)(b)(c) 25-23 25.611 25-23 25.1351(a)(d) 25-41

25.321(a)(b) 25-23 25.613(a)(b)(c)(d)(e) 0 25.1353(a)(b) 25-42

25.333(a)(b)(c) 0 25.615(a) 25-23 25.1357(a)(c) 0

25.335(a)(b)(c)(d) 25-23 25.619(a)(b)(c) 25-23 25.1359(d) 25-32

25.337(a)(b)(c) 25-23 25.625(a)(b)(c) 25-23 25.1381(a)(b) 0

25.341(a)(b)(c) 0 25.629(a)(b) 25-46 25.1431(a)(c) 0

25.351(a) 25-46 25.773(a)(2) 25-23 25.1529 25-54

25.351(b) 25-23 25.789 25-32 25.1541(a)(b) 0

25.365(a)(b)(d) 0 25.853(b-2) 25-32 25.1583(h) 25-42

25.561(a)(c) 25-23 25.981(a)(3) 25-102 25.1585(a) 25-42

25.571(a)(b) 25-45 25.1301(a)(b)(c)(d) 0 26.11(c) 0

26.47(b)(c) 26-1 -------------------------------------------------END-----------------------------------------------

Possession of this Su pplemental Type Certificate (STC) document by persons other than the STC holder does not constitute rights to the design data nor to alter an aircraft, aircraft engine, or propeller.

FAA Form 8110-2 (5/14) Page 3 of 3