What it approves
Installation of an ADS-B Out system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number ST10711DS
This certificate issued to: L-3 Communications Integrated Systems, L.P.
10001 Jack Finney Blvd.
Greenville, TX 75402
Part 25 of the Federal Aviation Regulations.
Original Product – Type Certificate Number: A2NM Make: The Boeing Company Model: 757-200
Installation of an ADS-B Out system in accordance with (1) L-3 Communications Integrated Systems L.P. Sealed Drawing List 10743-1 Revision A, dated 13 December 2019, (2) L-3 Communications Integrated Systems L.P. Instructions for Continued Airworthiness (ICA), Document No. G10743.28.08 Revision -, dated 19 November 2019 (3) L-3 Flight Manual Supplement Document No. G10743.28.51 Revision -, dated 25 November 2019, or later FAA/ODA approved revisions of
(1) (2) and/or (3).
(Limitations and Conditions continued on page 3 of 4)
Date of application: 2 Oct 2019 Date reissued:
Date of issuance: 16 December 2019 Date amended:
Signature
Title ODA-750173-SW Administrator Page 1 2 3 4 Amdt
FAA Form 8110-2 (5/14) Page 1 of 4
To (Name and address of transferee)
From (Name and address of grantor)
FAA Form 8110-2 (5/14) Page 2 of 4
Number: ST10711DS Date of Issuance: 16 December 2019 Limitations and Conditions: (Continued)
1. The installer must determine whether this design change is compatible with previously approved modifications.
2. If the holder agrees to permit another person to use this certificate to alter the product, the holder must give the other person written evidence of that permission.
3. Installation of STCs ST0081WI-D and ST10696SC are prerequisites for this STC.
Certification Basis:
Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for The Boeing Company 757-200 aircraft is as follows:
a. The type certification basis for The Boeing Company 757-200 series airplanes is shown on TCDS A2NM for parts not changed or not affected by the change.
b. The certification basis for parts changed or affected by the change since the reference date of application, 02 October 2019, is as follows:
(Certification Basis continued on Page 4 of 4)
--------------------------------------------------END-----------------------------------------------
FAA Form 8110-2 (5/14) Page 3 of 4
Number: ST10711DS Date of Issuance: 16 December 2019
Para. Amdt. Para. Amdt.
25.21(a)(1) 25-42 25.609(a)(b) 0
25.23(a)(b) 0 25.611 25-23
25.29(a)(b) 25-42 25.613(a)(b)(c)(d)(e) 0
25.301(a)(b) 25-23 25.615(a) 25-23
25.303 25-23 25.619(a)(b)(c) 25-23
25.305(a)(b) 25-23 25.625(a) 25-23
25.307(a)(b) 25-23 25.789 25-32
25.321(a)(b) 25-23 25.853(b-2) 25-32
25.331(a)(b)(c) 25-23 25.981(a)(3) 25-102
25.333(a)(b)(c) 0 25.1301(a)(b)(c)(d) 0
25.335(a)(b)(c)(d) 25-23 25.1307(c) 25-23
25.337(a)(b)(c) 25-23 25.1309(a)(b)(c)(d)(g) 25-41
25.341(a)(b) 0 25.1322(d) 25-38
25.351(b) 25-23 25.1351(a)(d) 25-41
25.351(a) 25-46 25.1353(a)(b) 25-42
25.365(a)(b)(d) 0 25.1357(a)(c) 0
25.561(a)(c) 25-23 25.1359(d) 25-32
25.571(a)(b) 25-45 25.1431(a)(c) 0
25.581(a)(b) 25-23 25.1529 25-54
25.601 0 25.1581(a)(b)(d) 25-42
25.603(a)(b) 25-38 25.1585(a)(b)(c) 25-42
25.605 0 26.47(c) 26-1
Exemption from CFR Part 26: Exemption No. 10819 was granted on 12 July 2013.
-------------------------------------------------END-----------------------------------------------
FAA Form 8110-2 (5/14) Page 4 of 4
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 757-200 Series | A2NM |