What it approves
Project 10807-2 installation of required modifications for an Electronic Standby Information System (ESIS)
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Supplemental Type Certificate Number ST10715DS
This certificate issued to: L3Harris Technologies Integrated Systems L.P.
10001 Jack Finney Blvd.
Greenville, TX 75402
Part 25 of the Code of Federal Regulations.
Original Product Make: The Boeing Company Type Certificate Number: A2NM Model: 757-200
Project 10807-2 installation of required modifications for an Electronic Standby Information System (ESIS) on a Boeing 757-200 aircraft in accordance with (1) L3Harris Technologies Integrated Systems L.P. Sealed Drawing List 10807-2 Revision A dated 03 Jan 2023, (2) L3Harris Technologies Integrated Systems L.P. Instructions for Continued Airworthiness (ICA), Document No. G10807.28.08-01 Revision -, dated 15 June 2022 (3) L3Harris Technologies Integrated Systems L.P. Flight Manual Supplement Document No. G10807.28.51-01 -, dated 15 June 2022, or later FAA/ODA approved revisions of (1) (2) and/or (3).
1. The installer must determine whether this design change is compatible with previously approved modifications.
(Limitations and Conditions continued on page 3 of 4)
Date of Application: 18 July 2022 Date Reissued:
Date of Issuance: 06 January 2023 Date Amended:
Signature
Title ODA-750173-SW Administrator
Supplemental Type Certificate Number ST10715DS
To (Name and address of transferee)
From (Name and address of grantor)
Number: ST10715DS Date of Issuance: 06 January 2023
Limitations and Conditions: (Continued)
2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
3. Installation of STC ST02372CH is a prerequisite to this STC.
4. No changes to the existing EWIS ICA are required as a result of this modification.
Certification Basis:
Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for The Boeing Company 757-200 aircraft is as follows:
a. The type certification basis for The Boeing Company 757-200 series airplanes is shown on TCDS A2NM for parts not changed or not affected by the change.
b. The certification basis for parts changed or affected by the change since the reference date of application, 18 July 2022, is as shown below:
(Certification Basis continued on Page 4 of 4)
A Type Certificate holder who allows a person to use the Type Certi ficate to manufacture a new aircraft, aircraft engine, or propeller must provide that person with a written licensing agreement acc e ptable to the FAA. (Ref. 14 CFR 21.55).
Number: ST10715DS Date of Issuance: 06 January 2023
--------------------------------------------------END-----------------------------------------------
25.305(b) 25-86 25.1321(a)(b)(d)(e) 25-41
25.307(a) 25-72 25.1323(a)(b)(c)(d)(e)(f)(g)(h) 25-109
25.561(b3)(c) 25-91 25.1325(a)(c2ii)(d) 25-108
25.601 25-0 25.1331(a1)(a2) 25-41
25.603(a)(b)(c) 25-46 25.1333(a)(b) 25-41
25.605(a) 25-46 25.1351(a) 25-72
25.853(a) 25-116 25.1353(a)(b) 25-113
25.869(a4) 25-113 25.1381(b) 25-72
25.981(a3) 25-102 25.1431(a)(c) 25-113
25.1301(a)(b)(c)(d) 25-0 25.1529 25-54
25.1303(b) 25-90 25.1581(a)(b)(d) 25-72
25.1309(a)(b)(c)(d)(e)(f)(g) 25-41 25.1585(a)(b) 25-105
25.1316(b)(c) 25-80 26.11(c) 25-7
25.1317(b) 25-122
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 757-200 Series | A2NM |