STC ST10877SC-D

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: ST108775C-D This certificate issued to: Dassault Falcon Jet Corp.

3801 East 10" Street Little Rock, Arkansas 72202-3366 Purl 25 of the Federal Aviation Regulutions.

Original Product - Typo Certificute Number: A50NM Make: Dassault Aviation Model: Falcon 2000EX Description of Type Design Change:

Avionics and Interior Installations in accordance with Data List Report No. F2EX-01030, Revision C dated 4/22/10, or later FAA approved revision.

FAA Approved AFM Supplement, Report 37159-F2EX-D227 dated 4/22/10 or later FAA approved revision is Supplemental Maintenance Manual, Report F2000EX-SN 208, revision C, dated 4/17/10 or later FAA approved revision is required.

You cannot use descriptive data about this design change to duplicate other products. This approval is limited to only the installation made in Dassault Aviation Model 2000EX Serial No. 208.

This STC does not permit manufacturing of parts for multiple installations.

Dutc of upplicution: 1/7/10 Date Reissued:

Dule of issuunce: 4/22/10 Date Amended:

FEDERAL AVIATIO By Direction of the Administrator TOMNISTRATO (Signature) Robert J. Feazell ODA-700141-SW STC ODA administrator (Title)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST108775C-D Issue Date: 4/22/10 Description of Type Design Change: (Continued):

(None) Limitations and Conditions: (Continued):

(None) Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Falcon 2000EX (EASy Definition) aircraft fitted with this STC is as follows.

Except for the requirements listed in "b" below, the certification basis for this STC is the same as stated in Type Certificate Data Sheet (TCDS) A50NM, Revision 5 dated 10-18-07. The EASy designation for Falcon 2000EX does not correspond to a model designation. This is only a commercial designation for airplanes on which Major modification numbers M1691, M1745, and M1504 have been embodied.

b. The requirements peculiar to this STC are listed below.

SECT. PARA. AMDT. SPECIFIC REQUIREMENT SECT. PARA. AMDT. SPECIFIC REQUIREMENT

25.785 a, b,c, d, 25-88 Seats, berths, safety belts, and 25.1353 25-123 Electrical equipment and f,g, i,j,k, harnesses. installations.

25.1357 25-123 Circuit protective devices.

25.791 a,o, c, d, 25-72 Passenger information signs 25.1360 25-123 Precautions against injury.

and placards. 25.1365 a, b,c,d 25-123 Electrical appliances, motors,

25.851 a, 1,2,3, 25-74 Fire extinguishers. and transformers.

5,7,8, 25.1411 a,b,d, 1, 25-79 General.

25.853 a,c, f,g,h 25-83 Compartment interiors. 2,4, 0, f,

25.855 d,f,g 25-93 Cargo and baggage g compartments. 25.1415 a,b,c,d 25-82 Ditching equipment.

e 25-123 H25.1 a,b,c 25-123 General

25.856 a 25-111 Thermal/Acoustic Insulation materials.

25.899 a,b 25-123 Electrical bonding and protection against static electricity.

25.981 а,З 25-102 Fuel tank ignition prevention.

END

FAA Form 8110-2-1 (10-68) PAGE 2 of