STC ST10896SC-D

FAA Form 8110-2 (8/13) Page 1

Part of the Federal A viation Regulations.

Original Product – Type Certificate Number: MDNH:

MRGHO:

Signature

Title

ST10896SC-D Associated Air Center, Inc. - c/o CT Corporation System 1999 Bryan Street, Suite 900 Dallas, TX 75201 25 A16WE Boeing 737-700 Modification of an Executive Interior in accordance with Associated Air Center (AAC) "Master Document List" Document Number 2726000000, Revision B, dated December 20, 2010, or later FAA/ODA approved revision.

Airplane Flight Manual Supplement (AFMS), Document Number 2726021090, Revision IR, dated September 21, 2009, or later FAA/ODA approved revision is required.

Descriptive data about this design change can not be used to duplicate other products. This approval is limited to only the installation made in Boeing Model Number 737-700, Serial Number 32807. This STC does not permit manufacturing of parts for multiple installations.

3/20/2009 9/21/2009 12/11/2017 12/20/2010 Jose Mora-Vargas ODA Administrator ODA-710437-SW

FAA Form 8110-2 (8/13) Page 2

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

ST10896SC-D

FAA Form 8110-2 (8/13) Page 3

ST10896SC-D Limitations and Conditions (Continued):

Airworthiness limitation inspections per 14 CFR Part 25, Appendix H, are contained in Chapter 3 of AAC Document Number 2726050090, Revision D, dated August 30, 2010 titled “Instructions for Continued Airworthiness” or later FAA/ODA approved revision.

Certification Basis: The same as that identified on Type Certificate Data Sheet A16WE.

END