What it approves
ONE ONLY STC, SN NUMBER 36852: Installation of an Executive Interior
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 25 of the Federal Aviation Regulations.
Description of Type Design Change: Installation of an Executive Interior in accordance with Gore Design Completions (GDC), Ltd., Certification Drawing List (CDL), GCD-454-03, Revision J dated December 5, 2008, or later FAA approved revision. The aircraft is to be maintained per the “Instructions for Continued Airworthiness, Boeing 737-700 IGW Interior Modifications”. GDC Document Number GCD-416-05, Revision G, Dated December 4, 2008, or later FAA approved revision.
Limitations and Conditions: The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. You cannot use descriptive data about this design change to duplicate other products. This approval is limited to only the installation made in Boeing Model 737-75G Serial No 36852.
Gore Design Completions, Ltd.
607 North Frank Luke Drive San Antonio, TX 78226 A16WE Make: Boeing Model: 737-75G Serial No. 36852 Date of application: August 22, 2007
Date of issuance: December 08, 2008
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
Number ST10923SC Date of Issuance: December 08, 2008
Description of Type Design Change (Continued):
Airplane Flight Manual Supplement (AFMS) titled “Airplane Flight Manual Supplement for Boeing 737-75G with Executive Interior”, Document Number GFA-454-24, Revision IR, dated December 08, 2008, or later FAA approved revision required.
Limitations and Conditions (Continued): This STC does not permit manufacturing of parts for multiple installations.
Maximum seating for this aircraft (other than the pilot and co-pilot) is 5 crew (2 in the cockpit jump seats, 2 in the flight attendant seats and 1 in the crew rest area) and 16 passengers. Other than the pilot and co-pilot, no additional crew members are required on board the aircraft for compliance with this STC. This aircraft is not to be operated for hire or offered for common carriage.
Certification Basis: All regulations at the amendment levels identified in Type Certificate Data Sheet (TCDS) A16WE except for the following regulations that have been complied with at a high amendment level:
o 25.820 amendment 114
o 25.853 amendment 116
o 25.856 amendment 111
o 25.981 amendment 102
o 25.1423 amendment 115
o 25.1431 amendment 113
This STC incorporates compliance to the following regulations by exemption 6820:
14 CFR 25.785(h)(2)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 737-700 Series | A16WE |