What it approves
Installation of a cabin/cockpit AC power supply system for personal electronic device(s) and a TIA convection oven and its controller
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 25 of the Federal Aviation Regulations.
Description of Type Design Change: Installation of a cabin/cockpit AC power supply system for personal electronic device(s) and a TIA convection oven and its controller in accordance with Master Data List 1025-0000-00, Revision E, dated January 20, 2010, or later FAA approved revision.
Limitations and Conditions: The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. This modification may not be installed after August 30, 2010 unless (1) previously approved electrical wiring interconnection system (EWIS) instructions for continued airworthiness (ICA) have been evaluated and determined to be adequate for this installation by the FAA, or
(2) revised EWIS ICA have been approved by the FAA Oversight Office (refer to 14 CFR § 26.11).
ASIG, L.L.C.
10 Collins Industrial Place, Suite 3B North Little Rock, AR 72113 T00011AT Make: Empresa Brasileira de Aeronautica S. A.
(EMBRAER) Model: EMB-145XR and EMB-145LR
Date of application: May 05, 2009
Date of issuance: January 26, 2010
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 3 of 3
Number ST10968SC Date of Issuance: January 26, 2010
Certification Basis: The Certification Basis for this installation is per Type Certificate Data Sheet T00011AT plus the following:
Regulations that meet amendment 25-102
25.981(a)(3)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.