STC ST11100SC

Supplemental type certificate · Gore Design Completions Ltd

Holder
Gore Design Completions Ltd · United States
Status
Current · Issued
Status date
May 1, 2014
Applied
June 16, 2009
Product
Aircraft · Large Airplane
Certification basis
Part 21, Part 25
Data sheet
TCDSA43NM

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of an Executive Interior

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (8/13) Page 1

Supplemental Type Certificate Number ST11100SC This certificate issued to Gore Design Completions Ltd.

607 North Frank Luke Drive San Antonio, TX 78229

Part 25 of the Federal Aviation, Regulations.

Original Product – Type Certificate Number: A43NM Make: Airbus Model: A340-211, -212

Installation of an Executive Interior in accordance with Gore Design Completions (GDC), Ltd., Certification Drawing List Number 515- SD-03, Revision R, dated April 16, 2014, or later FAA approved revision. Airplane Flight Manual Supplement titled “Airplane Flight Manual Supplement for Airbus A340 211 and 212 with Executive Interior”, Document Number 515-TP-49, Revision IR, issued May 1, 2014, or later FAA approved revision is required.

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Installation of this STC first requires the installation of STC number ST09092AC-D.

The aircraft is to be maintained per the “Instructions for Continued Airworthiness”, GDC Document Number 515-TP-05, Revision A, released May 1, 2014, or later FAA accepted revision.

Date of Application: June 16, 2009 Date Reissued:

Date of Issuance: May 1, 2014 Date Amended:

Signature

S. Frances Cox

Title Manager, Special Certification Office Southwest Region

FAA Form 8110-2 (8/13) Page 2 Page 2 SUPPLEMENTAL TYPE CERTIFICATE, FAA FORM 8110-2 (CONTINUED)

To (Name of transferee)

(Address of transferee)

(Number and street)

(City, State, and ZIP Code)

From (Name of grantor)

(Address of grantor)

(Number and street)

(City, State, and ZIP Code)

FAA Form 8110-2 (8/13) Page 3

Supplemental Type Certificate (Continuation Sheet) Number: ST11100SC Date of Issuance: May 1, 2014

Maximum seating for this aircraft (other than the pilot, co-pilot, and observer) is 10 crew (flight attendants) and 77 passengers. Other than the pilot and co-pilot, a minimum of 8 flight attendants are required on board the aircraft for compliance with this STC. One flight attendant must be sitting near each emergency exit for taxi, takeoff, and landing. This aircraft is not to be operated for hire or offered for common carriage.

Certification Basis:

All regulations at the amendment levels identified in Type Certificate Data Sheet (TCDS) A43NM except for the following regulations that have been complied with at a higher amendment level:

o 25.613 amendment 25-112 o 25.820 amendment 25-114 o 25.854 amendment 25-74 o 25.856 amendment 25-111 o 25.869 amendment 25-72 o 25.899 amendment 25-123 o 25.981 amendment 25-102 o 25.1360 amendment 25-123 o 25.1365 amendment 25-123 o 25.1423 amendment 25-115 o 25.1431 amendment 25-113 o 26.11(c) amendment 26-0 o 26.41 amendment 26-4

This STC incorporates compliance to the following regulations by exemption 10420:

14 CFR 25.785(d) 14 CFR 785(h)(1) 14 CFR 25.813(e) 14 CFR 25.853(a-1)

This STC incorporates compliance to the following regulations by exemption 10826:

14 CFR 25.562(a) 14 CFR 785(b)

-END-

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
AirbusA340-211A43NM
AirbusA340-212A43NM