STC ST11168SC

FAA Form 8110-2 (8/13) Page 1

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number ST11 168SC

This certificate issued to: Pratt & Whitney Engine Services 249 Vanderbilt Avenue Norwood, MA 02062

Part _25 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: T00012WI

M ake: Cessna Model: 680A Series Description of Type Design Change:

Installation of a Pratt & Whitney Flight Data Acquisition, Storage, and Transmission System (FAST) in accordance with “Data List, Installation Data for Cessna Citation Latitude 680A” document no. GN4-T-100-5, revision A, dated 2/19/16 or later FAA approved revision; and “Instructions for Continued Airworthiness for Cessna Citation Latitude 680A,” document no. GN4-T- 260-6, revision A, dated 2/12/16 or later FAA accepted revision.

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3. Cessna Engineering Change Record 080504, titled "FAST BOX PROVISIONS INSTALLATION - 680A," revision '-' or later FAA approved revision, must be installed prior to installation.

Date of application: August 3, 2015 Date reissued:

Date of issuance: February 24, 2016 Date amended:

Signature Title _VT DRB Aviation Lead ODA Administrator ODA-831473-SW

This certificate may be trans ferred or made available to third pers ons by licens ing agreements in accordance with 14 CFR 21.47. Pos s es s ion of this Supplemental Type Certificate (STC) document by pers ons other than the STC holder does not cons titute rights to the des ign data nor to alter an aircraft, aircraft engine, or propeller. The STC’s s upporting documentation (drawings , ins tructions , s pecifications , flight manual s upplements , etc.) is the property of the STC holder. An STC holder who allows a pers on to us e the STC to alter an aircraft, aircraft engine, or propeller mus t provide that pers on with written permis s ion acceptable to the FAA. (Ref. 14 CFR 21.120

FAA Form 8110-2 (8/13) Page 2

SUPPLEMENTAL TYPE CERTIFICATE, FAA FORM 8110 -2 (CONTINUED)

TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number: ST11 168SC

To (Name of transferee)

(Address of transferee) (Number and street)

(City, State, and ZIP Code)

From (Name of grantor)

(Address of grantor) (Number and street)

(City, State, and ZIP Code)

FAA Form 8110-2 (8/13) Page 3

Number _ST11168SC Date of Issuance _February 24, 2016___

New certification basis: Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Cessna 680A aircraft modified by installing a Pratt & Whitney Flight Data Acquisition, Storage, and Transmission System (FAST) is as follows :

a. The type certification basis for Cessna 680A series airplanes is shown on TCDS T00012WI for parts not changed or not affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of application, August 3, 2015, include: None

-------------- END -------------

This certificate may be trans ferred or made available to third pers ons by licens ing agreements in accordance with 14 CFR 21.47. Posse ssi o n o f this Supplemental Type Certificate (STC) document by pers ons other than the STC holder does not cons titute rights to the des ign data nor to alter an aircraft, aircraft engine, or propeller. The STC’s s upporting documentation (drawings , ins tructions , s pecifications , flight manual s upplements , etc.) is the property of the STC holder. An STC holder who allows a pers on to us e the STC to alter an aircraft, aircraft engine, or propeller mus t provide that pers on with written permis s ion acceptable to the FAA. (Ref. 14 CFR 21.120