STC ST11884IB

Supplemental type certificate · Sabena Technics BGC

Holder
Sabena Technics BGC · France
Status
Current · Issued
Status date
January 23, 2025
Applied
November 12, 2024
Product
Aircraft · Large Airplane
Certification basis
Part 25
Data sheet
TCDSA28NM
Foreign approvals
EASA 10069544 Rev 2

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Activation of WiFi/LTE Cabin Network

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

IMPORT ST11884IB

SABENA TECHNICS BGC 9 BOULEVARD HENRI ZIEGLER

GALILEE BAT A 31700 BLAGNAC FRANCE Part 25 Title 14 Code of Federal Regulations A28NM Airbus SAS A318-111/-112 A319-111/-112/-113/-114/-115/-131/-132/-133

1. Activation of WiFi/LTE Cabin Network must be in accordance with Aeroconseil Master Data List Number 0908-01-A-MDL-R01, Revision 01, dated April 3, 2020, or later EASA approved revisions.

2. Maintenance must be in accordance with Aeroconseil Instructions for Continued Airworthiness Number 0908-01-A-ICA-R01, Revision 01, dated November 19, 2019, or later EASA accepted revisions.

(See Description of Type Design Change Continued on Page 3 of 3)

1. The installer must determine whether this design change is compatible with previously approved modifications.

(See Limitations and Conditions Continued on Page 3 of 3) November 12, 2024 January 23, 2025 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT ST11884IB 3

IMPORT ST11884IB Date of Issuance: January 23, 2025

Description of Type Design Change (continued):

3. Operation must be in accordance with Aeroconseil Aircraft Flight Manual Supplement Number 0908-01-A-AFMS-R01, Revision 1, dated October 21, 2019, or later EASA approved revisions.

2. Maintenance must be in accordance with "Airworthiness Limitations" section of Aeroconseil Instructions for Continued Airworthiness referenced in the Description of Type Design Change of this STC.

3. Operation must be in accordance with "Limitations" section of Aeroconseil Aircraft Flight Manual Supplement referenced in the Description of Type Design Change of this STC.

4. This STC is applicable to all serial numbers for this Make-Model.

5. Accomplishment of this STC requires the previous accomplishment of the following modification:

- Mechanical & Electrical provisions, Minor Change Approval 0897-02-A-MCA-R01, Revision 1, or later approved revisions.

6. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

Certification Basis:

Based on 14 CFR 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48A, the FAA certification basis for the Airbus SAS models A318 and A319 is as follows:

a. The type certification basis is shown on TCDS A28NM Revision 46 for parts not changed or not affected by the change.

b. The type certification basis is shown on TCDS A28NM Revision 46 for parts changed or affected by the change plus:

14 CFR Part 25 Amendment 25-122: §§ 25.1, 25.23, 25.29, 25.601, 25.1301,

25.1307, 25.1309, 25.1351, 25.1353, 25.1360, 25.1431, 25.1529, 25.1541, 25.1581.

----------END---------- 3 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 10

MakeModelData sheet
Airbus SASA318-111A28NM
Airbus SASA318-112A28NM
Airbus SASA319-111A28NM
Airbus SASA319-112A28NM
Airbus SASA319-113A28NM
Airbus SASA319-114A28NM
Airbus SASA319-115A28NM
Airbus SASA319-131A28NM
Airbus SASA319-132A28NM
Airbus SASA319-133A28NM