What it approves
Class Dividers and Attendant Partition Modification
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
ST12077SE Jamco America, Inc.
1018 80th Street SW Everett, WA 98203 Part 25 Title 14, Code of Federal Aviation Regulations T00001SE The Boeing Company 777-200LR Series Approval of this change in type design applies to the above aircraft model only. This approval should not be extended to other aircraft of this model series unless the installer determines that the relationship between this change and any other previously incorporated approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.
April 9, 2025 November 26, 2025 ODA Lead Administrator, Jamco America, Inc. ODA-300006-NM 3 Class Dividers and Attendant Partition Modification on Boeing Model 777-200LR Series aircraft in accordance with Jamco America, Inc. Master Drawing List (MDL) MDL3031-1, Revision B, dated October 27, 2025, or later Federal Aviation Administration (FAA) approved revisions.
ST12077SE November 26, 2025 3
ST12077SE November 26, 2025 Limitations and Conditions (continued):
A copy of this certificate and Jamco America, Inc. Master Drawing List, MDL3031-1, must be maintained as part of the permanent records for the modified aircraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Northwest Aerospace Technologies Inc., STC ST12215SE for the Cabin Interior Reconfiguration, must be performed concurrently with this modification.
Certification Basis:
The certification basis for this modification is based upon 14 CFR Part 25 and 26 amendment level as specified in Type Certificate Data Sheet (TCDS) T00001SE, except for those regulations listed below, for which compliance was demonstrated to a later amendment level than specified in the TCDS T00001SE:
§25.853(a)(d) Amdt. 25-116
For any future 14 CFR Part 26 amendments, the holder of this STC must demonstrate compliance with the applicable sections.
There are no additional limitations and conditions that are unique to this installation that should be defined on the STC.
- END - 3 3 Add Page
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 777-200LR Series | T00001SE |