STC ST12107NY

Supplemental type certificate · Delta Engineering Corporation

Holder
Delta Engineering Corporation · United States
Status
Current · Issued
Status date
April 24, 2026
Applied
November 17, 2025
Product
Aircraft · Large Airplane
Certification basis
Part 25
Data sheet
TCDSA28NM

From FAA DRS, with our copy of the certificate PDF. DRS record last changed June 2, 2026.

What it approves

Update of Cabin Interior

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: ST12107NY

This certificate issued to: Delta Engineering Corporation 3 Aviator Way Ormond Beach, Florida 32174

Part 25 of the Code of Federal Regulations.

Original Product A28NM Make: Airbus Type Certificate Number: Model: A320 Series

Update of Cabin Interior in accordance with Delta Engineering Master Data List (MDL) 0164-12550- 2607 Revision A dated Apr. 24, 2026 or later FAA approved revisions to Delta Engineering Master Data List previously listed. The Instructions for Continued Airworthiness as listed on the Master Data List are required with this installation.

1. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

2. Compatibility of this design change with previously approved modifications must be determined by the installer. (See Continuation Sheet 3)

Date of Application: November 17, 2025 Date Reissued:

Date of Issuance: April 24, 2026 Date Amended:

Title: Jonathan E. Moritz ODA Administrator ODA-800728-NE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: ST12107NY Effective Date: April 24, 2026

Transfer the ownership of Supplement Type Certificate Number:

(Continuation Sheet) Number: ST12107NY Effective Date: April 24, 2026

3. Reference Delta Engineering Master Data List for additional limitations and conditions and applicable serial numbers.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, this STC is a non-significant change. The certification basis for un-changed or not affected areas by this STC remains un-changed by this STC and the certification basis for this STC is as follows:

a. CFR Part 25 the certification basis defined in the TCDS.

b. CFR Part 26:

Section Title At Amendment §26.11 EWIS 26-7 §26.47 AASR 26-7 -------------------------------------------------END-------------------------------------------------

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 14

MakeModelData sheet
Airbus SASA320-111A28NM
Airbus SASA320-211A28NM
Airbus SASA320-212A28NM
Airbus SASA320-214A28NM
Airbus SASA320-216A28NM
Airbus SASA320-231A28NM
Airbus SASA320-232A28NM
Airbus SASA320-233A28NM
Airbus SASA320-251NA28NM
Airbus SASA320-252NA28NM
Airbus SASA320-253NA28NM
Airbus SASA320-271NA28NM
Airbus SASA320-272NA28NM
Airbus SASA320-273NA28NM