STC ST12230IB

FAA 8110-2 (10/24) Page 1 of ___ IMPORT ST12230IB Bombardier Aerospace 400 Cote Vertu Road West Dorval, Quebec Canada H4S 1Y9 Part 25 Title 14, Code of Federal Regulations T00003NY Bombardier Inc.

BD-700-2A12

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This STC is applicable to all serial numbers for this Make-Model.

(See continuation sheet 3) 08/20/2025 12/02/2025 John Yoo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

1. Installation, Provisions for Interior Equipment and Furnishings must be in accordance with Configuration Definition Record RAZ-BM700-234, Rev. AW, dated June 18, 2025, or later Transport Canada Civil Aviation (TCCA) approved revision.

2. Maintenance must be in accordance with Instructions for Continued Airworthiness document EIP259100-ICA, Revision 3, TCCA approved November 11, 2025, or later TCCA approved revision.

4. This approval is limited to only the installation of interior equipment and furnishings provisions. The FAA has not certified the equipment for which these provisions are intended.

You must get additional FAA approval to install this equipment. The FAA must evaluate the installation to ensure it complies with the applicable airworthiness standards.

5. Instructions for continued airworthiness associated with the aircraft completion modification STC installed subsequent to the wiring provisions in this STC, must address the electrical wiring interconnection system (EWIS) provisions installed during final assembly of the basic (green) aircraft contained in this STC.

----------END---------- 3 3