Supplemental type certificates
49,120 STCs, most recently changed first. Search by what an STC changes, its holder or a model.
Query with SQL
duckdb -csv -c "SELECT stc_number, description, holder, status, status_date FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' ORDER BY status_date DESC NULLS LAST, stc_number"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT stc_number, description, holder, status, status_date FROM 'https://openairdocs.org/data/latest/faa_stc.parquet' ORDER BY status_date DESC NULLS LAST, stc_number
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
STC SA2-316Installation of flush loop antenna.STC SA2-318Installation of Goodyear brake 9530303 and related equipment.STC SA2-320Installation of Surface Combustion Corporation Janitrol heater Model S100, 100,000 BTU output.STC SA2-327Installation of extended tail cone fairing.STC SA2-346Modification of flap and trailing edge.STC SA2-351Installation of unfeathering system.STC SA2-354Installation of new engine nacelle cowling and related equipment.STC SA2-357Installation of right and left cockpit dome windows.STC SA2-382Revised exhaust system.STC SA2-39The fuselage structure altered to incorporate a window between Station 492 and 506.STC SA2-400Revision of flap mechanism.STC SA2-401Installation of 200 amp generator system.STC SA2-43Fuselage structure modified R & L side to incorporte enlarged windows and relocation of the cabin emergency exit.STC SA2-44Altered the fuselage structure to incorporate enlarged windows.STC SA2-446Installation of windshield and propeller anti-ice system.STC SA2-447Installation of Janitrol S-200 heater, P/N 20C65, System (derated to 150 BTU).STC SA2-47The original mechanical carburetor heat valve control, R & L engine, replaced with an electric actuator for controlling the R & L engine carburetor heat valve movement.STC SA2-48Original hydraulic reservoir and support structure removed.STC SA2-51A 200 amp generator system installationSTC SA2-511Installation of wheel well doors.STC SA2-512Installation of instrument panel.STC SA2-513Installation of fuel flow system.STC SA2-514Installation of Radio Racks.STC SA2-515Installation of cabin seats.STC SA2-516Installation of three place couch.STC SA2-517Installation of cockpit seats.STC SA2-518Installation of 'Two Shot C02 System Installation.'STC SA2-519Installation of Bendix radar RDR-1 system not covered by SA4-72 (Lear Radome Installation)STC SA2-52Installation of surface combustion type S-100 heater.STC SA2-521Installation of Edison continuous fire detection system.STC SA2-524Installation of R&L cockpit window.STC SA2-526Installation of horizontal stabilizer short fiberglass tip.STC SA2-53Installation of American Generator control system.STC SA2-537Installation of airspeed system.STC SA2-54Installation of one piece instrument panel and dual vacuum instruments.STC SA2-55Installation of enlarged nose alcohol de-icing tank (6 gal. capacity).STC SA2-56The landing light mounting in each outer wing panel leading edge alteredSTC SA2-560Installation of Warren McArthur chair Model 225 or 239 for pilot and co-pilot.STC SA2-572Installation of airspeed system.STC SA2-58Installation of picture window.STC SA2-595Installation of fuel flow indicatorSTC SA2-597Installation of Lear Model L2C autopilot.STC SA2-6Installation of airspeed system when radar nose is installed.STC SA2-614Installation of rudder spring tabs and fuselage saddle, horizontal stabilizer incidence inc to 1 degree; flap tracks cut off, flap travel reduced to 51% of original travelSTC SA2-634Installation of picture windows.STC SA2-636Empennage modifications.STC SA2-639Installation of Surface Combustion Heater, P/N A97A28 and related equipment.STC SA2-64Installation of electrical system.STC SA2-652Installation of two 15 NS-250 Junior Jato standby rocket engines.STC SA2-664Structural modification to nacelle aft of firewall to eliminate the exhaust trough cut out.