- Holder
- Curtiss-Wright Corporation
- Revision
- 0
- Status
- Current
- Product
- Propeller
- Models
- 1
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 1
| Model | Also known as | Note |
|---|---|---|
| X-32909 |
Airworthiness directives · 0
ADs whose products are models on this data sheet, matched by model and maker.
No ADs matched this data sheet’s models
What the data sheet saysOCR
This is OCR from the scanned FAA data sheet. OCR can misread letters and numbers.
CURTISS - single piece propellers --
The pres the sage of fixed pected incehe it ablade, aluminum allow construction. The propeller weight
the weight of the inserted sleeve hub
Maximum
(SME NOTE 2) Cert Continuous Standard Engine Shaft
Basit HP RPM Diameter Pitch (See NOTE 1) (1b. ) NOTES
X-31900 ATC 136 225 2000 9'0" SAE 20 (a)
32909 2-70 102 1400 8'6" 96-48
32923 AIC 11/ 8'6" 96"-48 SAE 2T (a) mummmm
32934 33073 ATC 116 ATC 113 160 225 1750 2000 8'9"-8'0" 9'0 96"-48" 96"-48" SAE 2 (a) 70 84
33079 ATC 114 525 1775 96"-48" 80
33505 ATC 112 525 1600 10'0 96"-48 97
33525 ATC 115 220 2000 9'0 961-48" 87
33570 ATC 132 250 2000 8'10"-7'6" 96"-48 74
55500 ATC 175 100 70" 96"-48
55501 TC 539 300 2200 8'6"-7'0" 96"-48 b,c,d, e, f,g 56 3,4
55503 TC 186 420 2200 8'10"-7'0" 96"-48" c, e, i,g 62
ATC 649 160 2350 8:0"-6 96"-48"
55518 TC 717 200 2450 8'0"-6'6 96"-48" b,e, f 56
NOTE 1. The alphabetical letters listed do not appear upon the propeller but refer only to the followiny table and
indicate the engine shaft sizes for which the propeller (with proper adapters) is eligible.
Wood sections are used on the hub faces to allow the propeller to be fitted with a standard type wood
An inserted sleeve to fit on SAE No. 1 taper shaft.
An ineerted bleeve to fit on she wo. 20 spined anart. on SAE No. 20 splined shaft.
The propeller hub machined to fit on SAE No. 20 splined shaft.
The propeller hub machined to fit on SAE No. 30 splined shaft.
NOTE 2. Model Designation. Eligible with the prefix X or EX.
Eligible with the pitch indicated in inches following the model designation. Example, 55501-60 indicates a
pitch of 60".
Propellers also are now stamped with the diameter and pitch in the following manner: 55501 PX 'X''
(pitch and diameter in ft., inches).
NOTE 3. Apprail expired. No propeller manufactured after the date specified is eligible for use on certificated
270 119:107 176. 136 113, дерне Екріге July 1, 1935
132, 175 January 10, 194.
186, 539, 649, 717 February 16, 1956
voTe Propeller. bearin the in serial numbers are eligible, with an aluminum allow insert machined to fit
М-4007, М-4010, М-4011, М-4012, М-4014, М-4018, М-4026, М-4027, М-4028.