- Holder
- Menasco Manufacturing Co.
- Revision
- 0
- Status
- Current
- Product
- Engine
- Models
- 1
- Registered
- 1 aircraft
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 1
| Model | Also known as | Note |
|---|---|---|
| Buccaneer B6S |
Airworthiness directives · 0
ADs whose products are models on this data sheet, matched by model and maker.
No ADs matched this data sheet’s models
Registered aircraft
Registry models that point at this data sheet, with their registered aircraft.
PMA parts · 1
Current parts manufacturer approvals (PMA): parts the FAA has approved companies to make as replacements or modifications. Each record lists its models as free text; OpenAirDocs matched them to this data sheet’s models, so check the FAA record before relying on it. Newest first.
What the data sheet says
From the PDF’s text layer, line by line: tables lose their columns. The PDF is the record.
MENASCO MANUFACTURING COMPANY
MODELS: Menasco Buccaneer A-6
T.C. NUMBER: ATC 139
Model Buccaneer B6S
Type 6LAI
Rating:
Hp, rpm, pressure
altitude (ft.) 200-2250-4500 (See NOTE 1)
Fuel (minimum octane
aviation gasoline) 73
Bore and stroke, in. 4.500 x 5.125
Displacement, cu. in. 489
Compression ratio 5.5: 1
Weight (dry), lbs. 415
Crankshaft gearing None
Propeller shaft, SAE No. 10
Supercharging
(impeller gear ratio) 8.75: 1
Carburetion Stromberg NA-R7 carburetor with 2-1/4 in. venturi
Ignition, dual Bosch JF6 magnetos
Certification basis Approved Type Certificate No. 139
NOTE 1. During take-off and initial climb the engine shall be limited to 37-1/2 in. manifold
pressure or less. The throttle may be held at this manifold pressure for not longer than one
minute. In climb or level flight the manifold pressure limit is 35.8 inches.
NOTE 2. Approval expired 10/7/41. No engines of this model manufactured after this date or
with serial numbers above 6066 eligible for use in certificated aircraft.