- Holder
- Curtiss-Wright/Marquette Inc.
- Revision
- 7
- Revised
- January 27, 2012
- Status
- Current
- Product
- Engine
- Models
- 7
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 7
| Model | Also known as | Note |
|---|---|---|
| Double Row Turbo Cyclone 988TC18EA3 | ||
| Double Row Turbo Cyclone 988TC18EA1 | ||
| Double Row Turbo Cyclone 988TC18EA5 | ||
| Double Row Turbo Cyclone 988TC18EA6 | ||
| Double Row Turbo Cyclone 988TC18EA2 | ||
| Double Row Turbo Cyclone 988TC18EA4 | ||
| Double Row Turbo Cyclone 981TC18EA1 |
Airworthiness directives · 10
ADs whose products are models on this data sheet, matched by model and maker.
AD 60-08-05Cooling Shield to Wheel Lip ClearanceAD 56-20-06Gear ShaftsAD 57-06-04Engine Front SectionAD 57-08-07Impeller Drive Gear AssembliesAD 57-24-01Impeller Drive Gear AssembliesAD 58-13-05Piston Compression RingAD 58-18-01GovernorAD 59-10-05Governors.AD 59-17-01Propeller ShaftAD 60-03-10Oil Control Valve
STCs approved under this data sheet · 6
STC SE01966WIUse of GAMI G100UL High Octane Unleaded Avgas in spark ignition piston aircraft enginesSTC SE204SORework of cylinder assembly.STC SE207SOModification of PRT cooling cap. (CYCLONE 972TC18DA1 Military R-3350 Series)STC SE2WECylinder and intercylinder cooling baffles.STC SEW-2Fabrication of engine exhaust system clamps M-7540, M-7541 and M-7544.STC SEW-4Exhaust system parts.
What the data sheet says
From the PDF’s text layer, line by line: tables lose their columns. The PDF is the record.
Page No. 1 2 3
Rev. No. 7 7 7
FEDERAL AVIATION AGENCY
E-287
Revision 7
WRIGHT
Double Row Turbo Cyclone
981TC18EA1
988TC18EA1,2,3,4,5,6
January 27, 2012
TYPE CERTIFICATE DATA SHEET NO. E-287
Engines of models described herein conforming with this data sheet (which is a part of type certificate No. E-287) and other
approved data on file with the Federal Aviation Agency meet the minimum standards for use in certificated aircraft in
accordance with pertinent aircraft data sheets and applicable portions of the Civil Air Regulations provided they are installed,
operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions.
Manufacturer Curtiss-Wright/Marquette, Inc.
Fountain Inn, South Carolina
Model Double Row Turbo Cyclone 981TC18EA1 988TC18EA1,
EA3
EA4, EA6
988TC18EA2, EA5
Type 18RA with 3 Blow-down,
exhaust-driven turbines
Reduction gear ratio 16:7
Turbo drive ratio 6.52:1
- -
- -
- -
- -
Rating (with low impeller gear ratio) 6.46:1 - - - -
Max. continuous, hp, rpm, in.Hg. at:
Critical pressure altitude (ft.)
Sea level pressure altitude
2920-2650-49.5-4800
2860-2650-51.0-S.L.
- -
- -
- -
- -
Takeoff (5 min.), hp, rpm, in.Hg. at:
Critical pressure altitude (ft.)
Sea level pressure altitude
3400-2900-56.0-4000
3400-2900-58.5-S.L.
- -
- -
- -
- -
(with anti-detonant injection)
Takeoff (5 min.), hp, rpm, in.Hg. at:
Critical pressure altitude (ft.)
Sea level pressure altitude
3700-2900-58.0-3200
3700-2900-58.5-S.L.
—
—
—
—
(with high impeller gear ratio, dry) 8.67:1 - - - -
Max. continuous, hp, rpm, in.Hg. at:
Critical pressure altitude (ft.)
Low critical pressure altitude (ft.)
2450-2600-47.0-16,400
2415-2600-48.5-10,800
- -
- -
- -
- -
Takeoff (5 min.), hp, rpm, in.Hg. at:
Critical pressure altitude (ft.)
Low critical pressure altitude (ft.)
2550-2600-49.0-15,200
2535-2600-49.5-13,300
- -
- -
- -
- -
Fuel (minimum grade aviation gasoline) 115/145 - - - -
See Note 8.
Lubricating oil MIL-L-6082, WAD Spec. 5815 or 5818 - - - -
Bore and stroke, in. 6.125 X 6.312 - - - -
Displacement, cu. in. 3350 - - - -
Compression ratio 6.70:1 - - - -
Weight (dry), lbs. 3670 3645 (EA1, 3) 3745 (EA2)
C.G. location (dry)
Fwd. of mounting flange centerline, in.
Left of vertical centerline, viewed
from rear, in.
Off propeller shaft, in.
18.22
0.014
0.133 above
3675 (EA4, 6)
- -
- -
- -
3775 (EA5)
18.54
0.021
0.193 below
Propeller shaft, SAFE no. 60 - - - -
Fuel injection model Bendix Stromberg PR-58-S2 master
control with two Direct injection pumps
- - - -
Ignition, Dual
Timing, BTC
Scintilla DLN-9 magneto
25 (30 in cruise)
- -
- -
- -
- -
Model Double Row Turbo Cyclone 981TC18EA1 98TC18EA1, EA3
EA4, EA6
988TC18EA2, EA5
Spark plugs See Note 9. - - - -
NOTES 1 through 10 1 through 9 1 through 9
"- -" indicates "same as preceding model."
"—" indicatoes "does not apply."
Certification basis Type Certificate No. 287
Production basis Production certificate No. 8
NOTE 1. Maximum permissible temperatures are as follows:
Head (Well Type Thermocouple) Barrel Oil Inlet
475 (500 for T.O. only) 350 220
NOTE 2. Fuel and oil pressure lmits:
Oil pressure (psi) 70 5. Fuel pressure (psi) 25 2
NOTE 3. The following accessory drives are provided:
Maximum Torque
(in. lbs.)
Maximum Bending
Accessory Rotation* Speed** Continuous Static Moment (in. lbs.)
Starter C 1.000 - 36000 350
Generator and accessory (2) C 3.110 1500 6600 400
Fuel pump (2) CC 1.000 25 450 15
Hydraulic pump (RH) C 1.400 600 2700 350
Hydraulic pump (LH) C 1.400 250 1650 75
Vacuum pump C 1.400 250 1650 75
Tachometer (2) 1C 0.500 22 50 15
1CC
Propeller governor C 0.857 125 825 30
*"C" - Clockwise viewing drive pad
"CC" - Counter clockwise
**Speed - Times crankshaft rpm
NOTE 4. These engines incorporate torquemeters, provi sions for crankcase mounting and double-acting hydraulic
propeller provisions.
NOTE 5. The ratings of these engines are based on standa rd conditions of temperature and barometric pressure
(60 F and 29.92 in.Hg. at sea level) and 80% relative humidity. If corrected to dry standard air
conditions, the rated powers would be increased appr oximately 2.5% at sea level to 0.4% at 15,000 ft.
for equal manifold pressure settings.
NOTE 6. These engines incorporate 3 bl ow-down turbines for exhaust gas power recovery. To insure against
secondary damage being caused by a turbine blad e failure, it is required that each turbine wheel be
provided with an approved type of guard prior to use in certificated aircraft. These guards should be
capable of at least cushioning the energy effects of a failed blade.
NOTE 7. The model 988TC18EA1 is sim ilar to the 988TC18EA3 model, except for installation feature differences.
The 988TC18EA2 is similar to the 988T C18EA1 except for reduction gear ratio.
The models 988TC18EA4, 5 and 6 are similar to models 988TC18EA1, 2 and 3 respectively except for
parts variations which permit increased cruise power ratings.
3 E-287
NOTE 8. The 988TC18EA1, 2, 3, 4, 5, and 6 engines are e ligible for use with grade 100/130 at the following ratings
for all operations include cruise:
With low impeller gear ratio:
Max. continuous, hp, rpm, in.Hg. at:
Critical pressure altitude (ft.)
Sea level pressure altitude
2450-2600-41.5-9400
2380-2600-44.0-S.L.
Takeoff (5 min.) hp, rpm, in.Hg. at:
Critical pressure altitude (ft.)
Sea level pressure altitude
2950-2900-48.0-8500
2880-2900-53.0-S.L.
With high impeller gear ratio:
Operation with grade 100/130 fuel not permitted.
NOTE 9. The following spark plugs are approved on these engines:
AC 275, 286A, 288, 298
Champion R103, RHB27P, R HA29E, RHA29N, RHB29E, RHB29N
Lodge RS35R (except EA4, 5 and 6)
NOTE 10. The wet low ratio takeoff rating of the 981TC18EA1 engine is based on the use of fuel derichment and
water-alcohol injection at the rate of 18-1/4 pounds per minute at 26 p.s.i. at the control valve. The
water injection fluid should comply with AMS-3006 Type 1 which specifies:
Methyl alcohol 48-52% by volume
Water 48-52% by volume
....END.....