TCDS E4IN

Type certificate data sheet · Continental Aerospace Technologies, Inc. · Engine

Holder
Continental Aerospace Technologies, Inc.
Revision
9
Revised
September 19, 2022
Status
Current
Product
Engine
Certification basis
CAR 10
Models
4
Registered
2 aircraft

The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.

On this page

Models · 4

ModelAlso known asNote
RR O-300-CFormerly Rolls-Royce plc, then Rolls-Royce Limited
RR O-300-AFormerly Rolls-Royce plc, then Rolls-Royce Limited
RR O-300-DFormerly Rolls-Royce plc, then Rolls-Royce Limited
RR O-300-BFormerly Rolls-Royce plc, then Rolls-Royce Limited

Airworthiness directives · 2

ADs whose products are models on this data sheet, matched by model and maker.

Registered aircraft

Registry models that point at this data sheet, with their registered aircraft.

STCs approved under this data sheet · 6

What the data sheet says

From the PDF’s text layer, line by line: tables lose their columns. The PDF is the record.

E41N Revision 9 CONTINENTAL AEROSPACE TECHNOLOGIES, INC. RR O-300-A, -B, -C, -D September 19, 2022 DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION TYPE CERTIFICATE DATA SHEET NO. E4IN Engines of models described herein conforming with this data sheet (which is part of Type Certificate No. E4IN) and other approved data on file with the Federal Aviation Administration meet the minimum standards for use in certificated aircraft in accordance with pertinent aircraft data sheets and applicable portions of the Civil Air Regulations provided they are installed, operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions. Type Certificate Holder Continental Aerospace Technologies, Inc. (Continental®) 2039 South Broad St. Mobile, Alabama 36615 Type Certificate Holder Record Continental Motors, Inc. Company name change January 1, 2020 (Continental Aerospace Technologies, Inc.) Teledyne Continental Motors Ownership & name change as of April 19, 2011 (Continental Motors, Inc.) Type Certificate Holder Record: Rolls-Royce transferred ownership to Teledyne Continental Motors on December 12, 1983 Model RR O-300-A, -B, -C, -D Type 6HOA Rating, ICAO or ARDC standard atmosphere Max. continuous hp, rpm, full throttle at sea level pressure altitude 145-2700 Takeoff hp, rpm, full throttle at sea level pressure altitude 145-2700 Fuel (min. grade aviation gasoline) 80/87, ASTM D7547 (UL91), ASTM D7547 (UL94) Lubricating oil Lubricating oils qualified under SAE-J1899 or J1966 are considered qualified under Continental Spec MHS-24 Oil inlet temperature Oil grade Below 120°F SAE 20 Over 120°F SAE 40 Bore and stroke, in. 4.0625 X 3.875 Displacement, cu. in. 301 Compression ratio 7.0:1 Weight (dry), lb. 268 C.G. location (with accessories where eligible) Fwd. of mounting lug rear face, in. 8.1 Below crankshaft, in. 1.6 Propeller shaft, SAE No. See Note 7. Carburetion Marvel-Schebler MA-3SPA P/N 628945 Page No. 1 2 3 Rev. No. 9 8 8 E4IN 2 Ignition, dual, magnetos Continental SF6LN-12 or S6LN-21, or J. I. Case Model 67 or 2 Continental S6LSC-21 or Slick Electro 664; or 1 ea. Continental S6LN- 200 or -204. Timing, °BTC Right 26, Left 28 Spark plugs See Note 8. Oil sump capacity, qt. 8: 7.46 usable at 5° nose-up and 5.6 usable at 5° nose-down; 7.76 usable at 10° nose-up and 3.77 usable at 10° nose-down attitudes NOTES 1, 2, 3, 5, 6, 7, 8 Certification basis CAR 10 and British Civil Airworthiness Requirements Section C (BCAR Section C is equivalent to CAR Part 13, effective June 15, 1956, as amended by 13-1 through 13-3, effective October 1, 1959). Type Certificate No. E4IN issued April 2, 1963. Date of application for Type Certificate: May 18, 1962 NOTE 1. Maximum permissible cylinder head, barrel and oil inlet temperatures, 525°F, 290°F, and 225°F respectively. Maximum oil inlet temperature limit is 240°F when using Spec. MHS-24 oil SAE No. 50 above 40°F ambient and SAE No. 30 or 10W30 below 40°F ambient. NOTE 2. Pressure limit for normal operation: Fuel at carburetor inlet: For pump system: 1-1/2 to 6 psig For gravity system: Minimum 11 in. fuel hand differential between carburetor fuel inlet fitting and float bowl chamber, maximum 6 psig. Oil 30 to 40 psig NOTE 3. The following accessory drive or mounting provisions are available: Accessory Type of Drive Direction of Rotation* Speed Ratio to Crankshaft Max. Torque (in.-lb.) Maximum Overhang Moment (in.-lb.) Continuous Static Generator Automotive CC 2.035:1 60 500 100 **Starter Automotive C 35.77:1 ***Starter Automatic C 24.727:1 engagement ****Vacuum pump AND 20,000 CC 1.545:1 100 800 25 ***Fuel pump Automotive 0.500:1 diaphragm *C - Clockwise viewing drive pad, CC - Counter Clockwise **Delco-Remy gear reduction drive and starter eligible on all models except O-300-D. ***Delco-Remy starter (Continental P/N 631261) with Continental adapter P/N 630527 eligible on model O-300-D only. ****Vacuum pump drive available on Model O-300-D only. NOTE 4. Reserved. NOTE 5. O-300 series engines are also equipped with crankshaft incorporating one each 5th and 6th order dampers. 3 E4IN NOTE 6. O-300-B is similar to O-300-A except incorporates crankcase and crankshaft provisions for use of a hydraulically controllable propeller from the engine oil pressure. O-300-C is identical to O-300-A except for propeller flange provisions as indicated. O-300-D is similar to O-300-C except for provisions for Continental right angle automatic engagement starter drive which incorporates a vacuum pump drive. NOTE 7. Propeller shaft O-300-A, -B : SAE-AS127 No. 3 flange O-300-C, -D : ARP502 Type 1 flange 4-7/8 in. o.d. by .31 in. thick with six 1/2 in. bolt holes in 4 in. diameter circle. NOTE 8. The following spark plugs and/or those listed in Section 6-4.9 of the latest revision of M-0, Standard Practice Maintenance Manual are approved on this engine: AC HSR83IR, SR83IR, SR83P, HSR83P, A88, S88, S88D, HS88, SR88, HSR88, SR88D Auto Lite BR4, BR4S, BR4SB, H15, SH15, SH15R, SH20A, SH150, SH200A BG RB485S, RB919SR5, RB955S, 706, 706S Champion C26S, RC26S, C27, C27S, REM38E, REM38P, REM38W, RHM33P, RHM38W, RED39N, REM39N, RHD39N, RHM39N, REM40E, RHM40E, D41N, ED4IN, EM4IN, M4IN, M42E, EM42E Red Seal SA190, SE190, SJ190, SE230, SJ230 ....END.....