TCDS P00022AT

Page No. 1 2 Rev. No. 2 2 DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION TYPE CERTIFICATE DATA SHEET NO. P00022AT Propellers of models described herein conf orming wit h this data sheet (which is part of Type Certificate No. P00022AT ) and other approved data on fil e wit h the Federal Aviati on Admi nistration, meet the mini mum standards for use in certi ficated aircraft in accordance with perti nent aircraft data sheets and applicable porti ons of the Federal Avi ation Regulati ons provi ded they are install ed, operat ed and maintai ned as prescri bed by the approved manufacturer's manuals and other approved instructions. Type Ce rtificate Hol der Sensenich P ropell er Company 2008 Wood Court Plant City, Florida 33563 Type Fixed -Pitch Wood Materi al Wood (Birch) Number of Blades Two Basic Model Takeoff & Standard Hub Drilling Hub Dimensions Weight (See Note 2) Max. Cont. Diameter Pitch No. Dia. Dia. Bolt Dia. Thick. (lb.) HP RPM Holes Holes Circle (Max Dia.) W68T 2ER 115 2551 68” 76” - 48” 6 21/64 ” 4” 5-1/ 2” 2.75 ” 8.8 W68T 2ER2 115 2551 68” 76” - 48” 6 21/64 ” 4” 5-1/ 2” 3.15” 8.8 W68T 2ET 115 2551 68” 76” - 48” 6 21/64 ” 4” 5-1/ 2” 3.15” 8.8 Certific ation Basis: Model W68T 2ER; FAR 35 as amended through am endment 10 , effective August 30, 201 7. Model W68T 2ER2; FAR 35 as amended through amendment 10 , effective August 30, 201 7. Model W68T 2ET; FAR 35 as amended through am endment 10 , effective August 30, 201 7. MODEL TC Applicati on TC Issued W68T 2ER March 30, 2018 September 24, 2019 W68T 2ER2 March 30, 2018 September 24, 2019 W68T 2ET March 30, 2018 September 24, 2019 Production Basis: Production Certificat e No. 335CE NOTE 1. Installation . Installati on of wood propellers on fl anged crankshafts must include a front pla te of approximat ely the same area and thickness as the flange and AN bolts conformi ng to MIL -B-6812. See NOTE 7 for approved spacer l engt hs. a. Propeller Model W68T2E R is installed on Rotax 101.6mm flanged shaft or spool spacer . Bolts may also be met ric class CL 8.8 or CL 10. 9. b. Propeller Model W68T2E R2 is installed on Rotax 101.6mm flanged shaft or spool spacer . Bolts may also be metric class CL 8.8 or CL 10.9. c. Propeller Model W68T2ET is installed on Rotax 101.6mm flanged shaft or spool spacer with 0.552” di ameter drive bushings . Bolts may also be metric class CL 8.8 or CL 10. 9. P00022AT Revision 2 SENSENICH W68T2ER, W68T2ER2 and W68T2ET August 28, 2023 P00022AT Revision 2 2 NOTE 2. Model Designation . Model Designation W 68 T2 E T 70 Designates minor change not affecting interchangeability or eli gibility “G” or “J ” for glass synthet ic fabric tipping “M” for metal erosi on shi el d “U” for uralite erosion shield Pitch in inches at .75 radius station Designates hub confi gurati on “R” - for install ation on Rot ax 101.6mm flanged shaft or spool spac er. “R2” - for i nstallati on on Rotax 101.6mm flanged shaft or spool spac er. “T” - for i nstallati on on Rot ax 101.6mm flanged shaft or spool spac er wit h 0.552 ” diam et er drive bushings. Designates bl ade design Diamet er reduction i n inches by telescoping stations Basic diameter in inc hes Designates wood propeller NOTE 3, 4, 5, 6, and 8. Not applicabl e. NOTE 7. Extensions . Propeller is approved for spool type ext ensions up to and incl udi ng 4.72”. NOTE 9. Not applicable ... END ...