- Holder
- McCulloch Aircraft Corporation
- Revision
- 1
- Status
- Current
- Product
- Propeller
- Certification basis
- Part 35
- Models
- 2
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 2
| Model | Also known as | Note |
|---|---|---|
| 6112 | ||
| 6100D |
Airworthiness directives · 0
ADs whose products are models on this data sheet, matched by model and maker.
No ADs matched this data sheet’s models
What the data sheet says
From the PDF’s text layer, line by line: tables lose their columns. The PDF is the record.
Page No. 1 2
Rev No. 1 1
DEPARTMENT OF TRANSPORTATION
FEDERAL AVIATION ADMINISTRATION
P1WE
Revision 1
McCulloch
6100D
6112
TYPE CERTIFICATE DATA SHEET NO. P1WE
Propellers of models described herein conforming with this data sheet (which is part of type certificate no. P1WE) and other
approved data on file with the Federal Aviation Administration, meet the minimum standards for use in certificated aircraft in
accordance with pertinent aircraft data sheets and applicable portions of the Federal Aviation Regulations provided they are
installed, operated, and maintained as prescribed by the approved manufacturer's manuals and other approved instructions.
Type Certificate Holder McCulloch Aircraft Corporation
900 Lake Havasu Drive
Lake Havasu City, Arizona 86403
Type Fixed-pitch (single piece)
Material Wood laminate
Number of blades Two
Takeoff &
Maximum Hub Drilling
Model Continuous No. Dia. Dia. Hub Dimensions Weight (lb)
See Note 2 HP RPM Diameter Holes Holes Bolt Circle Dia. Thickness Max. Dia.
6100D 180 2700 72" 6 1/2" 4-3/4" 6-3/4" 3-5/8" 12.4
6112 180 2700 72" 6 1/2" 4-3/4" 6-3/4" 3-5/8" 12.4
Certification basis FAR Part 35 as amended to 3 April 1967, Type Certificate No. P1WE
Date of application for Type Certificate: 17 April 1969
Production basis None
NOTE 1. Installation. Installation is to be made in accordance with the airplane installation manufacturer's assembly
drawing.
NOTE 2. Model Designation. The model designation of the TC holder, McCulloch, does not relate to propeller
geometric parameters. Propeller 6100D is manufactured by the Sensenich Corporation as their Part No.
W72KZL-52; Propeller 6112 is Sensenich Part No. W72KZL-49.
Basic model designation
W 72 K Z L - 52
Geometric pitch in inches measured at 75% span station
Left-hand rotation
Hub dimensions
Basic blade design
Diameter in inches
Wood
P1WE 2
NOTES 3, 4, 5, 6, 7, and 8. Not applicable.
NOTE 9. Special Limits. Approved for use on pusher type aircraft only.
Engine Model. Lycoming O-360-A2D (up to 180 hp and 2700 rpm)
Diameter. 72 inches
Placards. None
.....END.....