- Holder
- Lenape Aircraft and Motors Inc.
- Revision
- 0
- Status
- Current
- Product
- Engine
- Models
- 1
The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.
On this page
Models · 1
| Model | Also known as | Note |
|---|---|---|
| Papoose LM-375 |
Airworthiness directives · 0
ADs whose products are models on this data sheet, matched by model and maker.
No ADs matched this data sheet’s models
STCs approved under this data sheet · 1
What the data sheet says
From the PDF’s text layer, line by line: tables lose their columns. The PDF is the record.
LENAPE AIRCRAFT AND MOTORS, INC.
MODELS: Lenape Papoose LM-375
T.C. NUMBER: T.C. 215
Models Papoose LM-375
Type 3RA
Rating:
Maximum continuous, hp,
rpm, at S.L. pressure altitude 75-2450-S.L.
Take-off (one minute), hp,
rpm, at full throttle 75-2450
Fuel (minimum octane
aviation gasoline) 73
Bore and stroke, in. 4.25 x 4.00
Displacement, cu. in. 170.5
Compression ratio 5.8: 1
Weight (dry), lbs. 142
Crankshaft gearing None
Propeller shaft, SAE No. 0
Supercharging (impeller gear
ratio) None
Carburetion Stromberg NA-S3 or NA-S3A carburetor with 1-1/4 in.
venturi
Ignition, dual Edison Splitdorf RM-3 magnetos
Certification basis Type Certificate No. 215
NOTE 1. Engine equipped with flexible mounting ring Drawing 800, weight 5 lbs.
NOTE 2. Maximum permissible cylinder head, barrel and oil inlet temperatures, 500 degrees
F.,
300 degrees F., and 200 degrees F., respectively.
NOTE 3. Approval expired 6/30/41. No engine of this model manufactured after this date
eligible for use in certificated aircraft.