TCDS TC 3

Type certificate data sheet · Gladden Products Corp. · Engine

Holder
Gladden Products Corp.
Revision
0
Status
Current
Product
Engine
Models
1

The release keeps the latest revision of each data sheet. Model names are as the data sheet lists them.

On this page

Models · 1

ModelAlso known asNote
Kinner K-5

Airworthiness directives · 0

ADs whose products are models on this data sheet, matched by model and maker.

No ADs matched this data sheet’s models

STCs approved under this data sheet · 1

What the data sheet saysOCR

This is OCR from the scanned FAA data sheet. OCR can misread letters and numbers.

MCDEIS: Gladden Products, Kinner K-5 I.C. NUMEER: T.C. 3 Model K-5 SRA Fating: Maximum continuous, DE. IEm.. at S.I. Fress. alt. 100-1810-S.L. Take-off (one minute). hr, Ipm, at full throttle 100-1810 Fuel (minimum octane aviation gasoline) 70 Pore and stroke, in. 4.25 × 5.25 risplacement, cu. in. 372 compression ratio 5. 1:1 weight (dry). Ibs. 275 Propeller shaft, SAE NO. Carburetion Stromberg NAR-5 carburetor with 1-5/8 in. venturi or 1-7/16 in. Ignition, dual Scintilla PN-5D or SB-5 magnetos or Bosch FU5B1 S100 magnetos Ignition timing, degree BTS Right hand 25; Left hand 27 Certification basis Type Certificate No. Froduction basis Production Certificate No. 601 NOTE 1. 00, 16, part 125, 26, 8, 4-110 150, 0-186, 151, 1550 6203. Nos- A-95, A-100, NOTE 2. and 200 degrees F., respectively. Maximum permissible cylinder head, barrel and oil inlet temperatures, 550 degrees F.. 300 degrees F..