TCDS TC 704 Freedman

FREEDMAN PC-2 PROPELLER T.C. 704 Туре Blade shank Engine shaft Hub material Aluminum allo} Blade material lahogany and birch lam. ated with fabric and brase tipping (See NOTE 2) Number of blades TWO Hubs eligible PC-203 Propeller Weight Blades Eligible махітит Diameter Complet (See NOTE 2) HP Limits (1D.) NOTES P-200-72X P-201-72 to P-201-60 P-200-75 to P-200-72 80 80 80 3700 2700 754-12" 72"-60" 9,10 P-202-70 to P-202-66 80 P-203-81 to P-203-74 80 2250. 2375, 2575 2-203-74T 75 2600 -205-78 to P-205-70 78"-70" 9-206-72 to P-206-61 80 72"-60" 8-2008-14 C0 2-200A-00 80 2700 72"-60" P-216A-72 to P-216A-60 80 2700 72"-60" Certification basis manufactured after that date NOTE NOTE 1. Hub Model Designation. Diade Model Designation. hunteh muffixed palescoped blades are eligible at the sane rating and diameter diameter in inches. indicates that the diameter has been by telescoping the original blade model limitations as cut-off blades Blades of the basic model designation are of laminated mahogany and birch construction. suffix added to the model designation denotes a change in material as follows; B-birch; M-maple; MB-maple and birch. (Example P-216C - laminated walnut and birch; P-216B - laminated birch.) NOTE 3. Adjustable on the ground. NOTE 4. Feathering. Not apple bit hand version of an approved model propeller is aligible at the same rating and NOTE 5. Jeft Hand Models. NOTE 6. model P-216A blade. NOTE 7. NOTE 8 NOTE 9. Spellers with lad intactured after the spele date and with fiel numer high to han the following Accessories. Special mice: Not applicable Not applicable. are limited to 40 hp. and 2575 r.p.m. Bladde 3-24. P-201-72 B-683 NOTE 10. Rejected Parts. All blades retipped by other than the manufacturer rejected.