TCDS Wood Propellers/Jim Kimball

Jim Kimball Enterprises, Inc. (effective 9/30/88.) (formerly listed as Eagle-Air) The Propellers are of two-bladed, laminated wood construction with metal tipping. Maximum Hub Drilling Hub Dimensions Cert. Continuous Std. No. Dia. Dia. Bolt Thick- Wt. Model Basis HP. RPM Diameter Pitch. Holes Holes Circle Diameter ness (Lb.) Notes D-500 TC 11 65 1950 81 " 44" 7/16" 4-5/8 " 7" 4" 16 4,10 D-400 TC 135 102 1400 102" 64" 3/8 " 5-1/4" 7-1/4" 4-1/8 " 24 10 D-400 TC 1:35 102 1400 102" 64" 3/8 " 5" 7-1/4" 4-1/8 " 24 10 D-620 TC 465 100 1810 90 " 58" - 50" 3/8 " 5-1/4" 7-1/4" 4-1/8 " 19 4,10 D-552 TC 508 90 2250 78" - 76" 58 " 7/16" 4-5/8 " 6-7/8 " 4" 15 3,4,10 D-552-A TC 508 90 2250 76" - 74" 60 " 7/16 " 4-5/8" 6-7/8" 4" 14 4,10 D-385 TC 521 D-385-A TC 521 82 1800 90 " 74" - 64" 3/8" 5-114" 7-114" 4-118 " 18 10 43K15131 TC 533 (See D-780) 10 44K24605 TC 533 (Same as D-759-759-77) 10 D-750 TC 533 225 2100 94" - 92" 74" - 68" 1/2" 6.693" 9-1/4i 6" 27 3,4,10 D-752 TC 533 (See D-750) 10 D-759 TC 533 225 2100 90 " 77" 7/16" 7" 9-1/4i 6" 28 5,10 D-760 TC 533 (See D-750) 10 D-761 TC 533 225 2100 96 " 62" 1/2" 6.693 " 9-1/4i 6" 27 5,10 D-761A TC 533 225 2100 96 " 62 " 7/16 " 7" 9-1/4 6" 27 3,10 D-761J TC 533 225 2100 96 " 62 " 5/8 i" 6-11/16" 9-1/4 6" 26 3,4,5,10 D-762 TC 533 220 2100 94 " 74" - 68 7/16 " 7" 9-1/4" 6" 27 3,4,5,10 D-762-1 TC 533 220 2100 93 " 74i - 68 7/16 ' 7" 9-1/4" 6" 27 3,4,5,10 D-762-2 TC 533 220 2100 92 " 74 - 68 7/16 ' 7" 9-1/4" 6" 27 3,4,5,10 D-762-3 TC 533 220 2100 91 " 74" - 68 7/16 ' 7" 9-1/4 6" 27 3,4,5,10 D-762-4 TC 533 220 2100 90 i 74i - 68 7/16 ' 7" 9-1/4" 6" 27 3,4,5,10 D-780 TC 533 180 2450 86 " 62 " 7/16 ' 7" 9-1/4 6" 27 4,5,10 D-781 TC 533 180 2450 86 " 57 " 3/8 " 5-1/4" 8-1/4 4-1/8 " 22 4,5,10 D-781-A TC 533 180 2450 86 " 57" 3/8 i 6-3/16 " 8-1/4 4-1/8 " 22 4,5,10 D-339 TC 576 40 2575 69 " 32" - 24" 3/8 " 4" 5-7/8 " 3-3/8 " 9 10 D-731 TC 585 150 2260 78 " - 74" 72" - 69 3/8 " 5-1/4" 7-1/2" 4.31 " 15 3,10 D-732 TC 585 125 2200 78 " - 74" 70" - 67 3/8 " 5-1/4 " 7-1/2 4-3/8 " 15 3,10 D-734 TC 585 125 2200 78" 67" 3/8 " 5-1/4 " 7-112 4-1/4" 16 10 D-735 TC 585 150 2260 83 " - 82" 65 " 3/8 " 5-1/4i 7-1/2 4-1/4" 14 10 D-736 TC 585 165 2300 83" - 82" 67" 3/8 " 5-1/4" 7-1/2 4-1/4i 16 3,10 D-628-D TC 585 165 2300 81 i 65 " 3/8 " 5-1/4i 7-112 4-1/8 " 15 10 D-360 TC 597 40 2540 69" - 67" 31 " - 28" 3/8 " 5" 6-5/8 2-1/2" 3,10 D-362 TC 597 40 2540 | 69" - 67" 31 " - 28" 3/8 " 5" 6-5/8 2-1/2" 3,10 D-510 TC 598 90 2025 86 " 54" 5-1/4" 7-114 4" 16 10 D-510 TC 598 90 2025 86 " 54" 3/8 " 5" 7-114 4" 16 10 D-510-A TC 598 90 2025 82" 56 " 7/16" 5-1/4i 6-7/8 " 4" 16 10 D-512 TC 598 90 2025 | 82 " - 78" 66 " - 56" 3/8 " 5-1/4" 7-1/2" 4-1/8i 16 3,4,10 D-330 TC 599 45 1750 75" 53 " 3/8 4-23/32" 6-3/8 " 3" 10 D-330 TC 599 45 1750 76 " 45 " 3/8 4-23/32 6-3/8 " 10 D-333 TC 599 45 1750 75" 57" - 45" 4-23/32 6-3/8 " 10 D-333 TC 599 45 1750 76" 45" 3/8 " 4-23/32" 6-3/8 " 10 D-504 TC 601 90 2375 80" - 76" 58 " - 48" 7/16" 4-5/8" 7" 4" 14 3,10 D-504-A TC 601 (See D-504) D-504-B TC 601 (See D-504) D-550 TC 602 70 1950 82 " 44" 7/16 " 4-5/8i 6-7/8" 4" 15 4,10 D-600 TC 606 125 2050 96" - 94" 63" - 58" 3/8 " 5-1/4 " 7-1/4 " 4-1/8 " 21 3,10 D-600A TC 606 125 2050 96"- 94" 60" - 47" 3/8 " 5-1/4" 7-1/4" 4-1/8 " 21 3,10 Jim Kimball Enterprises, Inc. The Propellers are of two-bladed, laminated wood construction with metal tipping. Haximurt| Max. THat Druling Hub Dimensione Certification Continuous Corina. | 51d. Dia. Bott Thick- Mostel Holes hales Close plumater pare D-500 TC 11 65| 19601 $1" 44* T18" 5114- 458* 161 4,10% 0-400 ITG 135 1022 1400| 102 " 64 - 31 370 7-154 * 4-1/9 - 24 D-400 TC 135 102] 1400| 102- 54- 39 " 7-164 - 4-1/8 - 241 100 0-620 465 1810l 30 " 58" - 50" B] 39" 5-144" 7-14 * 21/8- 4,10 0-552 FiC 500 2250|78 - 76* 58 " 116* 458° 6-7/5 " 3,4,10 0-552-A Itc 504 2250/78 * - 74" 60- 716" 458" 8-7/9 * 4,10 0-385-A ITG 3221 _ 1800 90 * 174" - 64" 35 " 5-1,44 ° 7-144 - 4-1/8* І3K15131 (TC 533 See 0-7801 14K24605 ITC 513 (Same as 0-759-77) 0-750 TC 533 2251 2100|94 - 92" 174 " - 68* 122 * 0. 6503 - "3-14 " 6-752 ITO 533 15440-7501 0-759 TC 6x3 225 2100| 90- 716" 3-1/4 " 3,10 D-761 5760 ITC ITC 633 533 (See 0-750) 125 2100 961" 12* 271 3.10 10 D-761A 225| 2100 52 * 715" 271 1,10 D-761J TC 533 225 | 2100J 96" 82* 58 " 5-11/15" 3-114 - 26 3,4,51,30 ITC 333 (74 * - 68 * 718" 3-144 " 3,4,51,10 3-1/4 - 3,45,10 7716*1 314- 3,45,10 7/16* 3-14 * 3,4,51,10 3-124 1,4,51,10 7/16* 0-144 * 3/8 - 3-114 ° 3-144 3-72* 38* 3-1/4 * 7-1/2* 38 - 5-1/4 7-1/2* 3-144 - 7-102 5-144 - 3-122 7-1/2 3-1/2 8-53 2-12 3/8 - 6-58 2+1/2" 348- 3-144 * 7-104 7-194 3-14 " 6-718 5-14 - 7-1/2" 3/8 " 6-348 6-3/8 38 ° 4-23/32" 6-3/8 " 4-23/32* 6-3/8 THE 458 7715 458- 38 38 5-114 42312 +1/2° +5/16 3-1/2° 4-3/4* 4-23/32" 3-144 - 516 4-5/18 - 4378" 553:9335. 3-114 " 172" - 09 51 423/02 4-38* 4308" 38 4-3/8 - D-575A 38 - 43/8" D-580 6-14 * 0-565 За " 6-144 * D-685A 38"* D-596 2550 147° - 30 D-560 3015180" - 77" 166 - 56" D-500A 75| 2015| 162 - - 56- D-560A-1 75) 2015 75 * 62" - 55" 145) 173 - 62" D-827A ... 90 - 178 " - 63 * D-627 A-1 59 - 78* - 63* 0-6277-2 73" - 63" 04627A+3 78" - 63" D-627A-4 78" - 63* D-629 178" - 63" 0-629-1 78" - 63" 4115 0-629-2 145 | 85 " 178" - 63" 1445) 82 * 18* - 63" 41/5 145 2050 78 " - 63° 0-738 1850/90* - 94 - 81 - 77* 7715" 6-1/4 - 3-314- 44K15005 (Sare as D-785-59) D-785A D-785 828 185 | 2550 2550 785 * 85 " 159* - 57- 57 * 3/8 - 8-3/10 8-3/18 - 418* adea D-630 5225 150 l 2600 76 " 54" - 44" 7716" 6-34" D-631 Ire 1231 28001 74 * 155* -47* 3-114 - 7-114 - 41/16 Notes: Note 1. Approval expired as of February 11, 1944. No propellers of this model manufactured after that date are eligible for use on certificated Aircraft. Note 2. Birch and Walnut construction. Note 3. Effective February 15, 1939, on propellers Serial Nos. 3646 and up, pitch and diameter to nearest inch are stamped after model designation. Thus, D-360-28 (67) is model 360, 28 inch pitch, and 67 inch diameter. Note 4. Propellers with Serial Nos. Below 3017 are eligible with factory installed balancing plugs. Note 5. Effective December 9, 1942, on Serial Nos. 12000 and up, pitch to nearest inch is stamped after model designation. Thus, D-762-1-68 is model D-762-1 with a 68 inch pitch. Note 6. Propellers with Serial Nos. 11671 and up are manufactured with synthetic resin glue. Note 7. Propeller models D-562A, D-575A, and D-585A are identical to models D- 562, D-575, and D-583 except the boit holes of the former are counterfaced for use on flanged type propeller shafts. Note 8. Approval expired as of March 26, 1957. No propellers of this model manufactured after that date are eligible for use on certificated aircraft. I Note 9. Effective September 30, 1988, Propeller Type Certificates 11, 135, 465, 508, 521, 533, 576, 585, 597, 598, 599, 601, 602, 606, 607, 608, 609, 647, 660, 661, 665, 681, 737, 800, 827, and 828 were reissued in the name of Mr. James Kimball. 1 Note 10. Approval expired as of June 16, 1995. No propellers of this model manufactured after that date are eligible for use on certificated aircraft.