AD 2016-04-07

This AD is effective March 28, 2016.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of March 28, 2016.

For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC 2H-65, Seattle, WA 98124-2207; telephone 206-544-5000, extension 1; fax 206-766-5680; Internet https://www.myboeingfleet.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-2456.

Wayne Lockett, Aerospace Engineer, Airframe Branch, ANM-120S, FAA, Seattle Aircraft Certification Office (ACO), 1601 Lind Avenue SW., Renton, WA 98057-3356; phone: 425-917-6447; fax: 425-917-6590; email: wayne.lockett@faa.gov.

We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 767 airplanes. The NPRM published in the Federal Register on July 6, 2015 (80 FR 38408) (“the NPRM”). The NPRM was prompted by reports of cracking at a central part of the structure. The NPRM proposed to require repetitive inspections of the skin hidden by the upper and lower splice fittings on both sides of the fuselage, and corrective action if necessary. We are issuing this AD to detect and correct fatigue cracking of the hidden fuselage skin and cracking, corrosion, and other damage to the splice fittings and adjacent visible fuselage skin and structure that could lead to loss of a primary load path between the fuselage and the wing box, and consequent reduced structural integrity of the airplane.

We gave the public the opportunity to participate in developing this AD. The following presents the comments received on the NPRM and the FAA's response to each comment. Boeing stated that it concurs with the NPRM. United Parcel Service (UPS) and United Airlines stated that they have no comments on the NPRM. FedEx Express provided information on how the NPRM affects its fleet but made no requests.

Aviation Partners Boeing stated that accomplishing Supplemental Type Certificate (STC) ST01920SE ( http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgstc.nsf/0/59027f43b9a7486e86257b1d006591ee/$FILE/ST01920SE.pdf) does not affect the actions specified in the NPRM.

We concur with the commenter. We have redesignated paragraph (c) of the proposed AD as paragraph (c)(1) of this AD and added new paragraph (c)(2) to this AD to state that installation of STC ST01920SE does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01920SE is installed, a “change in product” alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.

We reviewed the relevant data, considered the comments received, and determined that air safety and the public interest require adopting this AD with the change described previously and minor editorial changes. We have determined that these minor changes:

• Αre consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and

• Do not add any additional burden upon the public than was already proposed in the NPRM.

We also determined that these changes will not increase the economic burden on any operator or increase the scope of this AD.

We reviewed Boeing Alert Service Bulletin 767-53A0263, dated January 12, 2015. The service information describes procedures for repetitive inspections of the skin and splice fittings at stringer 29, body station 786 ring chord. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

We estimate that this AD affects 430 airplanes of U.S. registry. We estimate the following costs to comply with this proposed AD:

We have received no definitive data that would enable us to provide cost estimates for the on-condition actions specified in this AD.

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: “General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Is not a “significant rule” under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979),

(3) Will not affect intrastate aviation in Alaska, and

(4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

1. The authority citation for part 39 continues to read as follows:

2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD):