AD 2026-22-13

This AD is effective November 24, 2026.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of November 24, 2026.

The Director of the Federal Register approved the incorporation by reference of a certain other publication listed in this AD as of September 14, 2026 (91 FR 55451, August 28, 2026).

The FAA must receive comments on this AD by December 24, 2026.

You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods:

• Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments.

• Fax: (202) 493-2251.

• Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

• Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2026-13797; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The street address for Docket Operations is listed above.

Material Incorporated by Reference:

• For Lycoming material identified in this AD, contact Lycoming Engines, 652 Oliver Street, Williamsport, PA 17701; phone: (800) 258-3279; website: lycoming.com/contact/knowledge-base/publications.

• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. It is also available at regulations.gov under Docket No. FAA-2026-13797.

Ramanpreet Singh, Aviation Safety Engineer, FAA, 1701 Columbia Avenue, College Park, GA 30337; phone: (516) 228-7300; email: ECB-COS@faa.gov.

The FAA invites you to send any written data, views, or arguments about this final rule. Send your comments using a method listed under the ADDRESSES section. Include “Docket No. FAA-2026-13797; Project Identifier AD-2026-01052-E” at the beginning of your comments. The most helpful comments reference a specific portion of the final rule, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this final rule because of those comments.

Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this final rule.

CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this AD contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this AD, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as “PROPIN.” The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this AD. Submissions containing CBI should be sent to Ramanpreet Singh, Aviation Safety Engineer, FAA, 1701 Columbia Avenue, College Park, GA 30337. Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking.

The FAA issued AD 2026-17-10, Amendment 39-23454 (91 FR 55451, August 28, 2026) (AD 2026-17-10), for Lycoming Model O-235, O-540, and IO-540 engines with a certain piston pin installed. AD 2026-17-10 required replacement of the affected piston pin with a part eligible for installation and, for certain engines, oil change and visual inspection of the engine oil filter, oil pressure screen, and oil suction screen for metal particulates. AD 2026-17-10 was prompted by several reports of piston pin failure that resulted in metal particulate contamination in the engine oil and engine failure. The FAA issued AD 2026-17-10 to prevent failure of the piston pin.

Since the FAA issued AD 2026-17-10, the manufacturer has identified additional Lycoming Model engines that are subject to the unsafe condition and identified Lycoming Model engines that were included in the applicability of AD 2026-17-10 that are not subject to the unsafe condition. Additionally, the FAA determined the need to clarify the applicability, the definition for an “affected piston pin,” and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is issuing this AD because the agency determined the unsafe condition described previously is likely to exist or develop in other products of the same type design.

The FAA reviewed Lycoming Service Instruction No. 1009BF, dated July 20, 2026, which identifies the compliance times between overhauls for certain Lycoming Model engines.

This AD also requires the following material, which the Director of the Federal Register approved for incorporation by reference as of September 14, 2026 (91 FR 55451, August 28, 2026).

• Lycoming Mandatory Service Bulletin No. (MSB) 667A, dated March 12, 2026 (Lycoming MSB 667A).

This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

This AD requires replacement of the affected piston pin with a part eligible for installation and, for certain engines, oil change and visual inspection of the engine oil filter, oil pressure screen, and oil suction screen for metal particulates. This AD also prohibits the installation of an affected piston pin on any engine. This AD also expands the applicability to include additional affected engines with a certain piston pin installed.

This AD requires oil change and visual inspection of the engine oil filter, oil pressure screen, and oil suction screen for metal particulates within 5 hours time-in-service (TIS), while Lycoming MSB 667A does not have this requirement.

Section 553(b) of the Administrative Procedure Act (APA) (5 U.S.C. 551 et seq.) authorizes agencies to dispense with notice and comment procedures for rules when the agency, for “good cause,” finds that those procedures are “impracticable, unnecessary, or contrary to the public interest.” Under this section, an agency, upon finding good cause, may issue a final rule without providing notice and seeking comment prior to issuance. Further, section 553(d) of the APA authorizes agencies to make rules effective in less than thirty days, upon a finding of good cause.

An unsafe condition exists that requires the immediate adoption of this AD without providing an opportunity for public comments prior to adoption. The FAA has found that the risk to the flying public justifies forgoing notice and comment prior to adoption of this rule because piston pin microcracks and inclusions are difficult to detect prior to failure, and can result in internal damage to the engine, in-flight shutdown, and loss of control of the airplane. The FAA has determined that affected engines will need to be inspected and have affected piston pins replaced within 25 hours TIS or earlier after the effective date of this AD depending on the engine model. Additionally, the compliance time in this AD is shorter than the time necessary for the public to comment and for publication of the final rule. Accordingly, notice and opportunity for prior public comment are impracticable and contrary to the public interest pursuant to 5 U.S.C. 553(b).

In addition, the FAA finds that good cause exists pursuant to 5 U.S.C. 553(d) for making this amendment effective in less than 30 days, for the same reasons the FAA found good cause to forgo notice and comment.

The requirements of the Regulatory Flexibility Act (RFA) do not apply when an agency finds good cause pursuant to 5 U.S.C. 553 to adopt a rule without prior notice and comment. Because FAA has determined that it has good cause to adopt this rule without prior notice and comment, RFA analysis is not required.

The FAA estimates that this AD affects 957 engines installed on airplanes of U.S. registry.

The FAA estimates the following costs to comply with this AD:

The FAA has included all known costs in its cost estimate. According to the manufacturer, however, some of the costs of this AD may be covered under warranty, thereby reducing the cost impact on affected operators.

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866, and

(2) Will not affect intrastate aviation in Alaska.

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

1. The authority citation for part 39 continues to read as follows:

2. The FAA amends § 39.13 by:

a. Removing Airworthiness Directive 2026-17-10, Amendment 39-23454 (91 FR 55451, August 28, 2026); and

b. Adding the following new airworthiness directive: