AD 47-07-01

Airworthiness directive · Fuel Selector Valve Indexing · Bellanca 14-13 and 14-13-2

Models
14-13, 14-13-2
Data sheet
TCDSA-773
Registered aircraft
120 matched by model
Product
Aircraft · Small airplane

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

47-07-01 BELLANCA: (Was Mandatory Note 4 of AD-773-5.) Applies to Models 14-13, 14-13-2 All Serial Numbers Up to and Including 1200.

To be accomplished not later than next periodic inspection.

Check fuel selector valve handle for proper indexing on valve by setting handle in L-ON and in R-ON position, by disconnecting the fuel line, and by blowing through line when there should be free passage of air. After tank positions have been set, the valve handle and shank should be permanently marked to identify the index position. Attach handle positively to shank by drilling through one side of the handle and halfway through the shank with a drill of number 53 size and inserting a pin of 1/16-inch diameter drill rod.

(Bellanca Service Bulletin No. 4 covers inspection of the valve handle installation.)

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 120

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Bellanca120 aircraft
By year built
19461948
Registered aircraft by year built: 96 aircraft
194666
194725
19485

24 with no year recorded

By model

Aircraft

See all 120 aircraft