AD 47-32-07

Airworthiness directive · Manifold Pipe Chafing · Scotts-Bell 47 47B

Model
47B
Data sheet
TCDSH-1
Registered aircraft
1 matched by model
Product
Aircraft · Rotorcraft

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

47-32-07 BELL: (Was Mandatory Note 7 of AD-1H-1.) Applies to All Model 47B With Aircooled 6V4-178-B3, -B32, O-335-1, or O-335-3 Engines.

Compliance required not later than next 25-hour inspection after September 15, 1947.

To eliminate chafing of intake manifold balance pipe against the oil tank an extra piece of hose, Aircooled P/N 11868, should be installed on the pipe at the side of the tank where the oil filter is mounted and approximately 1 3/8 inches from the hose which connects the two manifold pipes.

(Franklin Service Bulletin No. 55 dated May 28, 1947, pertains to this same subject.)

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 1

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Bell1 aircraft

By model

Aircraft