- Models
- 47B, 47B3
- Data sheet
- TCDSH-1
- Registered aircraft
- 1 matched by model
- Product
- Aircraft · Rotorcraft
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | 95a18151…ca8bcd7 | FAA DRS (API key needed) |
On this page
The airworthiness directive
47-32-08 BELL: (Was Mandatory Note 8 of AD-1H-1.) Applies to Models 47B and 47B3 Serial Numbers 2 Through 5, 7 Through 11, 13 Through 17, 19 Through 25, 27 Through 78.
Compliance required not later than 25 hours operation after September 15, 1947.
The stabilizer bar dampers should be inspected for the presence of an "AL" stamped on one of the attachment lugs. If such a marking does not appear, thoroughly inspect visually for leakage or other defects and replace if necessary with P/N A12141 (Houds) (stamped "AL"). A cracking or failing of the phenolic abutments has been reported, wherein the subject dampers have been rendered ineffective, thus affecting the flight characteristics of the helicopter.
(Bell Service Bulletin 47C47 covers this same subject.)
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 1
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.