AD 52-17-01

Airworthiness directive · Landing Gear Chain Guard · Bellanca 14-13, 14-13-2, 14-13-3 and 1 more

Models
14-13, 14-13-2, 14-13-3, 14-13-3W
Data sheet
TCDSA-773
Registered aircraft
131 matched by model
Product
Aircraft · Small airplane

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

52-17-01 BELLANCA: Applies to All Model 14-13 Series Aircraft.

Compliance required by August 15, 1952, with chain tension inspections to be repeated at intervals not to exceed 100 hours.

In order to prevent landing gear retracting chain malfunctionings, install chain guard, Bellanca P/N SK 491 or equivalent (see Figures 2 and 3), in both wings at the rear spar landing gear chain sprocket. Chains should be inspected and adjusted for proper tension. When correctly adjusted, chains should feel approximately as tight as the aileron cables.

FIGURE 2 FIGURE 3

(Bellanca Service Bulletins No. 20, dated March 22, 1948, and No. 27, dated September 11, 1950, cover the same subject.)

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 131

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Bellanca131 aircraft
By year built
19461949
Registered aircraft by year built: 102 aircraft
194666
194725
19486
19495

29 with no year recorded

By model

Aircraft

See all 131 aircraft