- Model
- E18S
- Data sheet
- TCDSA-765
- Registered aircraft
- 51 matched by model
- Product
- Aircraft · Small airplane
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed January 21, 2026.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 20 KB | 02f9175c…fe447c4 | FAA DRS (API key needed) |
On this page
The airworthiness directive
56-20-01 BEECH: Applies to All Model E18S Aircraft.
Compliance required as soon as possible but not later than November 15, 1956.
The nuts on the tailwheel truss axle should be checked to determine that they rotate when the gear is retracted with the airplane on jacks. If not, remove the axle and check for distortion and replacement of axle if necessary.
The side play between the tailwheel truss and the fuselage axle fittings should be checked by loosening one of the axle nuts. If total side play exceeds 0.030 the axle should be removed and a maximum of two washers between the truss and fitting on each side should be installed to take up the side play. The side play should not be taken up by tightening the axle nuts. As the axle is to rotate in the fuselage fittings the nuts should be finger tight plus sufficient turning to allow insertion of the cotter keys.
(Beech Service Bulletin No. 22, issued August 8, 1956, covers this same subject.)
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 51
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.
| 1954 | 3 |
|---|---|
| 1955 | 7 |
| 1956 | 8 |
| 1957 | 13 |
| 1958 | 3 |
| 1959 | 8 |
| 1979 | 1 |
| 1996 | 1 |
7 with no year recorded