- Effective
- April 10, 1964
- Models
- F12A-3, F12A-5
- Data sheet
- TCDSP-902
- Product
- Propeller
- Amendment
- 39-700
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 19 KB | f742badf…1108916 | FAA DRS (API key needed) |
On this page
The airworthiness directive
64-07-03 FLOTTORP: Amdt. 700 Part 507 Federal Register March 11, 1964. Applies to All F12A-3 and F12A-5 Series Propellers with FS200-1 Propeller Spinner.
Compliance required as indicated.
Within 15 hours' time in service after the effective date of this AD, accomplish the following rework unless already accomplished:
Remove the six AN 4H7A bolts attaching the 248-1 spinner bulkhead to the propeller flange and reinstall six shorter AN 4H6A bolts. The old AN 960-416L washers may be reused. Torque bolts to 70 to 90 inch- pounds. Safety wire all boltheads with MS20995-C32 safety wire.
This directive effective April 10, 1964.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.