AD 85-01-04

85-01-04 PITTS: Amendment 39-4980. Applies to Model S-2A (S/N's 2001 through 2105) airplanes certificated in any category.

Compliance: Required within the next 25 hours time-in-service after the effective date of this AD, unless already accomplished.

To prevent loss of normal aileron and elevator control:

(a) Visually inspect the cockpit control tube assembly using a 10 power glass for cracks in the area of the welds attaching the P/N 2-5100-12 stick housings to the P/N 2-5100-11 tube.

(1) If cracks are detected weld shut the cracks and install a P/N 2-5100-20 gusset at both the fore and aft stick housing locations in accordance with Pitts Service Letter No. 5, Revision B.

(2) If cracks are not present, install P/N 2-5100-20 gussets in accordance with Pitts Service Letter No. 5, Revision B.

(b) The aircraft may be flown in accordance with Federal Aviation Regulation 21.197 to a location where this AD can be accomplished.

(c) Installation of P/N 2-5100-19 gussets in accordance with Pitts Service Letter No. 5, Revision A, satisfies the requirements of this AD.

(d) An equivalent means of compliance with this AD may be used if approved by the Manager, Denver Aircraft Certification Office, Federal Aviation Administration, Northwest Mountain Region, 10455 East 25th Avenue, Suite 307, Aurora, Colorado 80010; Telephone (303) 340-5594.

This amendment becomes effective on January 21, 1985.