- Registered owner
- Beltzville Soaring Club
- Location
- Lehighton, PA
- Owner type
- Corporation
- Serial number
- 8
- Year built
- 1967
- Type
- Glider
- Engine
- None
- Airworthiness
- Standard, glider
- Airworthiness date
- March 24, 1967
- Certificate issued
- December 2, 1988
- Expires
- February 28, 2029
- Mode S code
- A24148
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 4
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1978 | 1 |
|---|---|
| 1987 | 1 |
| 1988 | 2 |
Information bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations · 4
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
FAA incident reports · 2
FAA accident and incident reports matched to this aircraft by N-number and event date, checked against the reported make and model.
Accident 19800420009989AForced/Precautionary Landing · Jersey Shore, PACrew attempted aero tow out of short field. Pilot realized there was not sufficient clearence and released glider.Accident 19760803024649ATo Init Climb(1st Pwr Reduct) · Fredericksburg, PAVertical stabilizer spar PN26711-21 failed inflight causing loss of vert stab and rudder.
Service difficulty reports
No reports matched to N2440WGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Schweizer SGS 2-33 aircraft
STCs that may be installed · 4
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Schweizer SGS 2-33
STC SA01734SEApplication of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail surfaces, control surfaces and related parts.STC SG01164CHInstall Cooper superflite 102 fabric.STC SG1186GLSurrendered and incorporated into STC SG01164CH.STC SG305GLInstall full swivel tail wheel, Cronig P/N SK-1, utilizing existing mounting points, bolts and hardware.