N329BA

Not registered

N-number · 1 earlier aircraft

Registered now
No
Earlier aircraft
1
Last cancelled
April 9, 2013

From the FAA registry file of October 29, 2026. The mark may be reserved or free to assign.

Aircraft that carried N329BA · 1

The FAA can assign a mark to another aircraft once a registration is cancelled. No aircraft carries N329BA now.

NTSB investigations on N329BA · 1

Of this N-number, whichever aircraft carried it.

FAA incident reports on N329BA · 7

Filed on this N-number, whichever aircraft carried it. Each report names the aircraft it was matched to.

Incident 20020115006549ISwrngn SA226TC · Iron Mountain-K, MI(-23) Company reported that while on short final to runway 01 in VFR conditions, the pilot controlled runway lights went out. The first officer, who was flying the aircraft, keyed the lights back on but was distracted trying to then reduce the intensity of…Jan 15, 2002 · Minor damageIncident 19950123002009ISwrngn SA226TC · Duluth, MNNarrative: on approach at dlh, gear was lowered. But got red warning light. Made low pass to let dlh ATCT confirm position of gear. Right main was not down. Pilots went through emergency check list. Tried 3 times to lower with emergency gear extension.…Jan 23, 1995 · Minor damageIncident 19931014047969ISwrngn SA226TC · Duluth, MNLost directional control on rollout. Veered off runway. Found broken wire on nose steering system.Oct 14, 1993Incident 19930908037069ISwrngn SA226TC · Ames, IARight side fire warning light on. Precautionary landing at Ames. Landed safely. Replaced sensor part .Sep 8, 1993Incident 19910826044699ISwrngn SA226TC · Minneapolis, MNRight engine torque fluctuating on takeoff. Aborted. Taxied to hangar and later took off.Aug 26, 1991Incident 19910108005069ISwrngn SA226TC · Bismarck, NDRight main gear failed to extend. Found excessive wear at gear door actuator roller. Worn parts for torque knee.Jan 8, 1991 · Minor damageIncident 19880622071469ISwrngn SA226TC · Chicago, ILVibration in control yoke on takeoff. Aborted. Elevators seized going to gate. Sas servo motor bearings had failedJun 22, 1988