N9653F

Cancelled 2009

Deregistered aircraft · 1987 Cessna 208 · Pratt & Whitney Canada PT6A-60A

Cancelled
April 16, 2009
Exported to
Australia
Status when cancelled
Triennial form not returned
Serial number
20800114
Year built
1987
Type
Fixed wing single engine
Engine
Turbo-prop
Airworthiness
Standard, normal
Airworthiness date
April 29, 1987
Certificate issued
July 28, 2004
Last registry action
July 17, 2007
Mode S code
AD7180
Owner when cancelled
Atlantic Aero Inc
Owner type
Corporation

From the FAA registry file of November 12, 2026, cancelled registrations. Owners’ street addresses are left out. The Mode S code belongs to the N-number, not the airframe.

FAA incident reports · 2

FAA accident and incident reports matched to this aircraft by N9653F and the event date: up to this one’s cancellation.

Service difficulty reports · 6

Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.

SDR 2008FA0000657Cowling · crackedTHE SECONDARY EXHAUST COWLING WAS FOUND TO HAVE A 5.5 INCH LONG CRACK NEXT TO THE CENTER EXHAUST HANGER ROD END BRACKET. (K)Sep 19, 2008 · N9653F · Cessna 208 · Engine Collector/Tailpipe/NozzleSDR MT9A00000021Housing · wornRT BRAKE CYLINDER HOUSING WORN AT THE ANCHOR BOLT PASS THROUGH HOLE ALLOWING THE ANCHOR BOLT TO BE PRESSED OUT BY HAND. THIS IS NORMALLY A CLOSE TOLERANCE FIT. THIS CONDITION IN THE PAST HAS CAUSED THE ANCHOR BOLT TO SHEER OFF CAUSING CATASTROPHIC DAMAGE TO THMay 12, 2008 · N9653F · Cessna 208 · Landing Gear Brake SystemSDR MT9A00000013Bellcrank · damagedTHE BOLT WAS FROZEN TO THE BUSHING SLEEVE. THIS PREVENTED THE BOLT FROM ROTATING INSIDE THE BUSHINGS AND ELONGATED THE BOLT HOLE THROUGH THE MOUNTING BRACKET. (K)Apr 23, 2008 · N9653F · Cessna 208 · Trailing Edge Flap Control SystemSDR MT9A00000012Bellcrank · damagedTHE BOLT WAS FROZEN TO THE BUSHING SLEEVE. THIS PREVENTED THE BOLT FROM ROTATING INSIDE THE BUSHINGS AND ELONGATED THE BOLT HOLE THROUGH THE MOUNTING BRACKET. (K)Apr 23, 2008 · N9653F · Cessna 208 · Trailing Edge Flap Control SystemSDR MT9A00000011Bellcrank · damagedTHE BOLT WAS FROZEN TO THE BUSHING SLEEVE. THIS PREVENTED THE BOLT FROM ROTATING INSIDE THE BUSHINGS AND ELONGATED THE BOLT HOLE THROUGH THE MOUNTING BRACKET. (K)Apr 23, 2008 · N9653F · Cessna 208 · Trailing Edge Flap Control SystemSDR MT9A00000010Bearing · corrodedTHE SEALED BEARING WAS CORRODED AND FROZEN. ALSO, THE BEARING WAS CORRODED TO THE BOLT. (K)Apr 23, 2008 · N9653F · Cessna 208 · Trailing Edge Flap Control System