- Manufacturer (registry)
- CONT MOTOR
- Model
- GTSIO-520-H
- Registry code
- 17048
- Installed in
- 9 registered aircraft
- Type
- Reciprocating
- Power
- 375 hp
- Data sheet
- TCDSE7CE
- Holder
- Continental Aerospace Technologies, Inc.
Model codes come from the FAA registry’s reference file.
On this page
Airworthiness directives that may apply · 24
ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 1975 | 1 |
|---|---|
| 1979 | 1 |
| 1981 | 1 |
| 1988 | 2 |
| 1991 | 1 |
| 1993 | 1 |
| 1995 | 1 |
| 1996 | 1 |
| 1998 | 1 |
| 1999 | 1 |
| 2004 | 1 |
| 2005 | 1 |
| 2007 | 1 |
| 2010 | 2 |
| 2011 | 1 |
| 2012 | 1 |
| 2016 | 1 |
| 2020 | 1 |
| 2022 | 1 |
| 2023 | 3 |
Engine · Continental GTSIO-520-H
AD 2023-05-16Reciprocating Engine Power SectionAD 2023-02-12Engine Air Intake SystemAD 2022-16-03Engine (RECIPROCATING)Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('17048'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('17048'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Information bulletins that may apply · 6
Engine · Continental GTSIO-520-H
SAIB NE-18-16POWERPLANT Alternator Drive CouplingSAIB NE-16-13Powerplant - Prohibited use of sealantSAIB NE-13-15Engine Controls: Continental Motors, Inc. (CMI) Throttle and Mixture Control LeversSAIB NE-13-04Continental Motors, Inc. (CMI) Connecting Rod Piston Pin Bushing InspectionSAIB NE-10-09Reciprocating Engine Power Section: Hydraulic Valve LiftersSAIB NE-09-08Reciprocating Engine Cylinder SectionQuery with SQL
duckdb -csv -c "SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_saib.parquet' WHERE engine_model_code IN ('17048'))
GROUP BY s.saib_number ORDER BY issue_date DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_saib.parquet' WHERE engine_model_code IN ('17048'))
GROUP BY s.saib_number ORDER BY issue_date DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 9
Query with SQL
duckdb -csv -c "SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
WHERE engine_model_code IN ('17048')
ORDER BY n_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT n_number, serial_number, year_manufactured, status, registrant_name, registrant_city, registrant_state
FROM 'https://openairdocs.org/data/latest/faa_aircraft_registration.parquet'
WHERE engine_model_code IN ('17048')
ORDER BY n_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB investigations · 4
Aircraft matched to this engine model through the registry, by N-number and event date, checked against the reported serial number, make and model.
Of 1 case NTSB coded with a defining event. All defining events
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
WHERE a.engine_model_code IN ('17048')
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c."mKey" = a.case_mkey
WHERE a.engine_model_code IN ('17048')
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
FAA incident reports · 7
Matched to this engine model through the registry, by N-number and event date, checked against the reported make and model.
Query with SQL
duckdb -csv -c "SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
WHERE engine_model_code IN ('17048')
ORDER BY event_date DESC, report_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
WHERE engine_model_code IN ('17048')
ORDER BY event_date DESC, report_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Service difficulty reports · 102
Query with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'GTSIO520H' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'GTSIO520H' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
STCs that may be installed · 26
Approved for this engine model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('17048')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('17048')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.