- Manufacturer (registry)
- GE
- Model
- CF700-2D-2
- Registry code
- 30028
- Installed in
- 0 registered aircraft
- Type
- Turbo-fan
- Power
- 4,500 lb thrust
- Data sheet
- TCDSE7EA
- Holder
- General Electric Company
Model codes come from the FAA registry’s reference file.
On this page
Airworthiness directives that may apply · 10
ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 1975 | 1 |
|---|---|
| 1976 | 1 |
| 1981 | 1 |
| 1985 | 1 |
| 1997 | 1 |
| 1998 | 2 |
| 2000 | 1 |
| 2001 | 1 |
| 2010 | 1 |
Engine · GE CF700-2D-2
AD 2010-09-08AFT Technologies combustion linersAD 2001-10-12Unapproved PartsAD 98-23-06Combustion Liner AssembliesAD 97-25-08Airworthiness Directives; General Electric Company CJ610 Series Turbojet and CF700 Series Turbofan EnginesAD 97-13-10Aft fan diskAD 85-18-03Stage 1 Turbine DiskAD 80-08-06 R1Turbine DisksAD 75-05-13Compound Turbine And Fan BladeAD 75-19-05Horizontal Drive ShaftAD 78-07-06Compressor DisksSuperseded and historical ADs · 1
Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('30028'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('30028'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Information bulletins that may apply · 1
Engine · GE CF700-2D-2
SAIB NE-08-49R1Turbine Engine Combustion SectionHistorical bulletins · 1
Query with SQL
duckdb -csv -c "SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_saib.parquet' WHERE engine_model_code IN ('30028'))
GROUP BY s.saib_number ORDER BY issue_date DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.saib_number, any_value(s.title) AS title, max(s.issue_date) AS issue_date, any_value(s.status) AS status
FROM 'https://openairdocs.org/data/latest/faa_saib.parquet' s
WHERE s.saib_id IN (SELECT saib_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_saib.parquet' WHERE engine_model_code IN ('30028'))
GROUP BY s.saib_number ORDER BY issue_date DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 0
No aircraft currently registered with this engine model
NTSB investigations
No NTSB investigations matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older cases aren’t counted.
FAA incident reports
No reports matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older reports aren’t counted.
Service difficulty reports · 158
SDR HAEA202309120274Engine · fodAIRCRAFT DEPARTED LYH-SHV, AT CRUISE ALTITUDE OF FL280 THE LEFT ENGINE EXPERENCED A LOSS OF POWER/FLAMEOUT, THE CREW DECENDED TO FL240 AND PERFORMED A SUCCESSFUL AIR START. AFTER LANDING IN SHV THE ENGINE WAS INSPECTED BY AMERISTAR MAINT AND THEY FOUND FOD DAMSDR 2023F00260Fcu · abnormalAIRCRAFT DEPARTED CHS, SHORTLY AFTER TAKEOFF THE RH ENGINE ROLLED BACK ON POWER. CREW CONTACTED ATC AND RETURNED TO CHS.SDR Y2PA2022090622048Engine · flamed outDISCREPANCY: CREW REPORTED THAT WHILE CONDUCTING ENGINE ACCELERATION CHECKS ON THE #1 ENGINE, THE #1 ENGINE FLAMED OUT AT FL290. THE CREW DECLARED AN EMERGENCY WITH CLEVELAND CENTER TO OBTAIN LOWER ALTITUDE, THEY DESCENDED AND PERFORMED A SUCCESSFUL RELIGHT AT
See all 158 difficulty reportsQuery with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'CF7002D2' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'CF7002D2' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
STCs that may be installed · 5
Approved for this engine model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.
STC SE976SOInstallation of an oil tank sight gauge on a G.E. oil tank, P/N6003T09P04.STC SE8674SWModification of the following engine oil tanks by adding a sight glass: 6002T03P01, 6002T03P03, 6003T09P01, 6003T09P02, 6003T09P03, 6003T09P04, 6003T89P01, 6003T89P02, 6003T03P02, 6002T03P04.STC SE966SOManufacture and installation of Axis C gearshaft plugs per Fed Ex Drawing F-72-003, Sheets 1 and 2.STC SE1057SOInstallation of capacitance type probe with oil quantity indicating system in oil tank.STC SE949SOInstallation of an oil level sight gauge.
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('30028')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('30028')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.